1.
Model Studies on Multitube Blow Tank Fly Ash Conveyor in Cold State
多管流化罐返料器的冷态模型实验研究
2.
Dynamic Simulation and Experimental Verification of The Oxford Stirling Cryocooler
牛津型斯特林制冷机动态模拟及实验验证
3.
THE REVISED DRAG FORCE MODEL FOR THE DENSE CFB RISER AND THE EXPERIMENTAL VALIDATION
高密度CFB提升管内气固两相曳力修正模型及冷态实验验证
4.
Cold Simulation Experiment and Numerical Simulation on a New Type of Low NOx Combustion Swirl Burner;
新型低NOx旋流燃烧器冷态模拟实验研究与数值模拟
5.
Experimental Study and Static Simulating Modal of Single-effect LiBr Absorption Refrigerator Using Plastic Pipe;
塑料管单效溴化锂吸收式制冷机实验研究及静态仿真模型
6.
Straw Pellet Fuel Cold Molding by Compression: Experimental Study and Numerical Simulation;
秸秆颗粒燃料冷态压缩成型实验研究及数值模拟
7.
3-D neutronics calculation of the 2×6 HCSB TBM model
中国氦冷固态实验包层2×6模型三维中子学计算
8.
Swirl Burner Experimental Study of 330MW Boiler under Cold Conditions;
330MW锅炉旋流燃烧器冷态模化实验研究
9.
Numerical Simulation of Micro-Refirgeration System and Experiment about Micro-Channel Condenser;
微型制冷系统模拟与微通道冷凝器实验研究
10.
Cold Model Experiment and Simulation of Autothermal Reforming Reactor
气态烃自热转化炉冷态实验研究与数值模拟
11.
Experimental Study and Numerical Simulation of a Novel Burner;
一种新型燃烧器的冷态试验与数值模拟研究
12.
Cold-state Modeling of Modified HT-NR3 Swirl Burners
改进型HT-NR3旋流燃烧器冷态模化试验研究
13.
Mathematical Model of a Continuous Annealing Simulator for Cold Rolled Strips
冷轧带钢连续退火模拟实验机的数学模型
14.
Investigation and Simulation of Air-source Heat Pump During Reverse Cycle Defrost
风冷热泵除霜过程动态特性模拟和实验研究
15.
Study on the Deposition Technology and the Simulated Experiment in Spouted-bed at Room-temperature;
热解碳沉积工艺及冷态喷动模拟实验研究
16.
Experimental Study on Straw Cold Molding by Pressure and Its Regression Analysis
秸秆颗粒冷态压缩成型实验研究及回归分析
17.
Study On The Dynamic Advanced Model Of The Pattern Of Trade & Experimental Analyses
贸易模式的动态演进模型与实证检验
18.
Magnet Cooling Model of the 70T Strong Pulse Magnetic Field in Low Temperature and Experiment Research;
70T脉冲强磁场磁体低温冷却模型与实验研究