1.
Die Forging Process of W6Mo5Cr4V2 Blank of Gear Shaping Cutter
W6Mo5Cr4V2插齿刀毛坯的胎模锻造
2.
Numerical Simulation of Die Forging for Corrosion Resistant Hubbed Flange
耐腐蚀高颈法兰胎模锻造成形的数值模拟
3.
horizontal parting
水平分模（平锻机）
4.
Development of Large Single-piece Forgings and Heavy Forging Presses in Aerospace Forging Industry
大型模锻件和模锻液压机与航空锻压技术
5.
Analysis of Defects and Protective Measure to the Forging Die Made by Squeeze Casting
液态模锻锻模常见缺陷分析及其预防
6.
CAD of finishing cavity for hammer forging
锤上模锻终锻型槽的计算机辅助设计
7.
Studies on the Quality of 4Cr5MoSiV Steel Forging Die Made by Squeeze Casting;
4Cr5MoSiV钢质液锻锻模质量分析与研究
8.
Material economy and design optimization of roll forging blanking die for connecting rod
连杆锻件节料与制坯辊锻模设计优化
9.
Liquid die forging process analysis and die design for steering nut forging die
转向螺母锻模块液态模锻工艺分析及模具设计
10.
wheel forging press
车轮坯成形模锻压力机
11.
Research on Heat Treatment Technology of 5CrMnMo Hot Forging Die
5CrMnMo热锻模淬火工艺研究
12.
Analysis on Hot Crack for Forging Die Made by Squeeze Casting
锻模液态模锻成形过程中热裂纹形成原因分析
13.
Research on CAD&FEM of Turbine Blade Die Forging;
汽轮机叶片模锻工艺CAD与模锻过程有限元分析
14.
Geometrical Analysis For the Surface Contour of the Die Cavity and Forging in Roll Forging Dies
辊锻模型槽与锻件轮廓曲面的几何分析
15.
Determination of Design Schemes about Forging and Forgging Die of Water Pump Drive Gear
水泵驱动齿轮的锻造及锻模设计方案的确定
16.
PROPOSAL AND ANALYSIS OF THE DYNAMIC MODEL OF FORWARD SLIP DURING ROLL FORGING CONSTANT SECTION PRODUCTS
等截面锻件辊锻前滑动力学模型的建立和分析
17.
The Simulation of Heavy Cylinder Forging at High Temperature;
大型圆筒形锻件高温锻造过程数值模拟
18.
Study on Fe Simulation of Forging Process of Heavy Axial Forgings;
大型轴类锻件锻造过程的数值模拟研究