1.
Stability Analysis of Continuous Rigid Frame Bridges with Double-leg Thin-walled High Piers during Cantilever Erection;
双肢薄壁高墩连续刚构桥悬臂施工稳定性分析
2.
Researches on Stability and Wind Effects of Rigid Frame Bridges with Flexible Twin Piers During Cantilever Erection;
双肢薄壁高墩刚构桥悬臂施工稳定性与风效应研究
3.
Battened Thin-Walled High Pier Stability Analysis of Long Span Continuous Rigid Frame Bridge at the Construction Stage;
大跨连续刚构桥的双肢薄壁高墩施工稳定性分析
4.
Analysis of influence factors of buffeting response and full-scale aeroelastic experiments for the Xiaoguan Bridge
贵阳小关桥双肢薄壁墩抖振响应试验与影响因素分析
5.
Experimental and Theoretical Research on Bearing Capacity of Cold-Formed Steel Double-C Section Compression Columns
开口双肢冷弯薄壁型钢组合截面立柱承载力的试验和理论研究
6.
plastic corrugated pipe with double thin wall
双层薄壁塑料波纹管
7.
Slabs-disassembled method of thin-walled bar analysis considering restrained torsion
薄壁杆约束扭转的单肢解析化分析方法
8.
SLABS-DISASSEMBLED METHOD OF FLEXURAL-TORSIONAL BUCKLING OF THIN-WALLED OPEN-PROFILE MEMBERS
开口薄壁构件弯扭屈曲的单肢解析化分析方法
9.
Optimization of Double Thin-wall Pier of Continuous Rigid-Frame Bridge Based on Reliability;
基于可靠度的连续刚构桥双薄壁墩优化设计
10.
Ultimate Capacity of Axially Loaded Thin-Walled Tapered Columns with Doubly Symmetric Sections
双轴对称薄壁锥形柱轴心受压的极限承载力
11.
Behaviour of Bi-Axially Loaded Thin-Walled Tapered Beam-Columns with Doubly Symmetric Sections
具有双对称截面的双轴加载薄壁楔形梁柱的性能分析
12.
NONLINEAR STABILITY ANALYSIS OF LONG-SPAN CONTINUOUS RIGID FRAME BRIDGE WITH DOUBLE THIN-WALL HIGH PIERS AT ITS CANTILEVER STATE
大跨双薄壁高墩连续刚构桥双悬臂施工状态非线性稳定分析
13.
Study of Hybrid Element of Thin-walled Beam and Its Application in Double Non-linear Analysis of Cable-Stayed Bridges
薄壁箱梁混合单元及其在斜拉桥双重非线性分析中的应用研究
14.
Experimental Study and FEM Analysis on Shear Resistance of High Strength Cold-Formed Steel Framing Walls with Double Boards;
高强冷弯薄壁型钢双面覆板墙体抗剪试验及有限元分析
15.
Experimental Study on High Strength Cold-Formed Steel Wall Studs with Wallboard on both Sides under Axial Compression;
高强冷弯薄壁型钢双面覆板墙体立柱轴压性能试验研究
16.
The Performance Research on the Beam-column Connections of Cold Bending Light-gauge Steel C Section with Angle at Bottom and Top of the Web;
顶底角钢、腹板双角钢连接的冷弯薄壁C型钢梁柱节点性能研究
17.
Optimization on Design Parameters of Double Thin-Wall Piers Based on General FEM Program;
基于通用有限元程序方法的双薄壁桥墩设计参数优化
18.
Experiment Research on Connections of Cold-formed Thin-walled Steel Frame with Double Webs Top and Seat Steel Angle;
带双腹板、顶底角钢连接的冷弯薄壁型钢梁柱节点试验研究