1.
Triaxial strength and deformation properties of frozen silty clay under low confining pressure
低围压下冻结粉质粘土的三轴强度及变形分析
2.
Programming solver tools of Excel evaluate shear strength parameters from results of triaxial tests
Excel规划求解三轴试验抗剪强度指标
3.
Variation pattern of strength of 2∶8 lime-soil based on its triaxial test
三轴试验下二八灰土强度的变化规律
4.
3D Finite Element Analysis of Stiffness and strength of Main Bearing Cap of Internal combustion Engine
内燃机主轴承盖强度和刚度的三维有限元分析
5.
Strength Analysis and Experimental Research on Soil-cement Mixed Pile Made by Triaxial Stirring Machine
三轴水泥土搅拌桩强度分析及试验研究
6.
Triaxial Test of Deformation and Strength Change of a Remolded Unsaturated Sand
重塑非饱和含粘砂土变形强度特性的三轴试验
7.
Static-dynamic coupling strength and deformation characteristics of rock under triaxial compression
三轴压缩岩石动静组合强度及变形特征的研究
8.
Three Dimensions-Finite Element Analysis on the Crankshaft Fatigue Strength of Engine
发动机曲轴疲劳强度的三维有限元分析
9.
Analysis of rock-socketed pile uniaxial compressive strength and bearing capacity of pile tip at three dimensional effects
嵌岩桩单轴抗压强度和三维作用下桩端承载力
10.
Experimental Study on Strength of Plastic Concrete under True Triaxial Experiment
塑性混凝土在真三轴下的强度试验研究
11.
Three-parameter Generalized Failure Criteria Based on Tension,Compression and Shear Uniaxial Strength
基于拉伸、压缩、剪切单轴强度试验值的材料三参数广义强度准则
12.
3-D FEM Anlysis of effect of structure factor on crankshaft flexure strength
三维有限元法分析结构因素对曲轴弯曲强度的影响
13.
Experiment Study of Shear Strength Parameter of Unsaturated Soil by Triaxial Test and Numerical Simulation of Excavation;
非饱和土强度参数的三轴试验研究与基坑开挖的数值模拟
14.
Debugging of a New True Triaxial Apparatus and Experimental Study on the Strength-Deformation Characteristics of Remolded Loess;
新型真三轴仪调试及重塑黄土强度变形特性的试验研究
15.
Study of Deformation and Strength of Loess with Triaxial Test Based on Digital Image Measurement;
基于三轴土样变形数字图像测量的黄土变形和强度研究
16.
Triaxial tests on strength and deformation modulus of No.2 layer silty clay of Shanghai
上海第②层粉质黏土非饱和强度与变形模量的三轴试验研究
17.
Optimization Design of Bearing for Internal Combustion Engine Considering Crankshaft Strength;
计及曲轴强度的内燃机轴承优化设计
18.
Analytical Investigation on Strength and Main Bearing Lubrication of CA4D32 Diesel Engine Crankshaft System Based on a Simulation Technique;
柴油机曲轴轴系强度和主轴承润滑仿真研究