1.
The shape of hole wall is varied accoirding to construction process.
孔壁形状因施工工艺不同而不同，通过孔径测试，可以及时发现施工工艺中的问题。
2.
nematoparenchymatous thallus
线形薄壁组织叶状体
3.
" Figurations and symbols on the arrangement plans of ships--Bulkheads, doors, windows and openings on wall, hatches and hatch covers"
GB/T3894.1-1983船用布置图图形符号舱壁、门、窗及舱壁孔、舱口及舱口盖
4.
multicellular glass in blocks, panels, plates, shells or similar forms
多孔玻璃,呈块状、板条状、平板状、壳状或类似形状
5.
Effect of horizontal conductive solid wall on natural convection in a porous triangular cavity
导热壁面对三角形多孔腔体内自然对流的影响
6.
Heat transfer in rectangular pin-finned channel with perforated plate
带射流孔板矩形扰流柱通道内的壁面换热
7.
Forming Principle of and Countermeasures to Blowhole in Cylinder Head of High Strength and Thin Wall
高强度薄壁灰铸铁气缸盖气孔形成机理与对策
8.
a herniation through the muscular wall of a tubular organ (especially the colon).
通过管状器官的壁形成的疝。
9.
Influence of Aperture Shape on Extraordinary Transmission Through Periodically Perforated Metal Films
孔阵形状对周期孔阵金属薄膜透过率的影响
10.
pendular configuration
湿润相移动时在毛细管壁上形成的液滴形状
11.
Characteristics of vertical sharp-edged orifice discharge(Ⅲ) Effect of geometry on orifice discharge coefficient
垂直锐边孔口的自由出流特性(Ⅲ)孔几何形状对孔流系数的影响
12.
The clinical experience of endoscopic thyroidectomy by the chest wall approach:a report of 48 cases
48例经胸壁三孔入路腔镜甲状腺切除术经验总结
13.
It showed that eccentric pressure is produced by eccentric decouple charge blasting on borehole wall.
实验结果表明，偏心不耦合装药在孔壁上形成明显的偏心应力场。
14.
The web perforation is a new formation in the cold-formed thin-walled steel members.
腹板开孔是冷弯薄壁构件中一个较新的构造形式。
15.
the edge of both flaps was rolled up and the posterior flap was turned up into a "hook" or "barrette".
裂孔边缘特别是后瓣多翻卷形成钩状或发夹状。
16.
A rounded eyelike marking, as on the tail of a peacock.
眼状斑点圆形眼状的斑点，如孔雀尾巴上的
17.
Research on Shape Distortion in Bore-Expanding Process with Titanium Alloy Sheet
钛合金板扩孔成形中的形状畸变现象研究
18.
Shape distortion in bore-expanding process with TA2M titanium sheets
TA2M钛板扩孔成形中的形状畸变现象研究