1.
This method can be used in the design of the spring to predict its transversal stiffness, thus providing parameters for the prediction of dynamic performance.
采用此方法可在设计阶段预测它的水平向刚度，为动力学性能计算提供参数。
2.
Lateral load distribution for pushover analysis considering story stiffness for building structures
建筑结构考虑刚度变化的Pushover水平侧向力分布
3.
Research on the Longitudinal Horizontal Stiffness Limited Value of Common Continuous Grider Bridge Pier s Top;
常用跨度连续梁桥墩顶纵向水平线刚度限值研究
4.
The fouction of roof longitudinal bracing on gabled frames structure
轻型门式刚架结构屋盖纵向水平支撑的作用
5.
Gravity Stiffness Method of Suspension Bridge Pre-Including Horizontal Component of Cable Tension Due to Live Loads;
直接计入活载水平拉力的悬索桥重力刚度法
6.
Simulation Analysis on Effects of Horizontal Stiffness in Lead-Rubber Bearings
铅芯橡胶隔震支座水平刚度影响因素数值分析
7.
Design of Horizontal and Vertical Supporting Stiffness for Inertia Reciprocating Machines
惯性往复振动机械水平和铅垂支承刚度设计
8.
Research of the Optimum Stiffness of Outriggers in Frame-tube Structures
带加强层框—筒结构中水平伸臂最佳刚度研究
9.
Influence of chordwise bending stiffness on aeroelastic characteristics of flexible high-aspect-ratio wing
水平弯曲刚度对大展弦比机翼颤振的影响
10.
average orientation
平均取向度,平均定向度
11.
Static Stiffness Analysis for the MGK7350 Surface Grinding Machine
MGK7350平面磨床静刚度分析
12.
The load, radial stiffness, axial stiffness and angular stiffness of precision spindle were formulated.
推导出精密主轴承载、向刚度、向刚度和角刚度的计算公式。
13.
Variable Rigidity Design Method of Rigid Pile Composite Foundation;
刚性桩复合地基空间变刚度调平设计
14.
Transverse and Axial Stiffness of ZnO Nanosprings
ZnO纳米弹簧的横向与轴向刚度分析
15.
The Effect of Transverse Cracks on Rigidity and Strength of CRCP Pavement;
横向裂缝对CRCP路面刚度和强度的影响
16.
Rotational Stiffness of Plated Column Base and Effective Length of Columns
平板柱脚的转动刚度和柱的计算长度
17.
The compensation must be insensitive to temperature and to lateral dislevelment.
补偿作用必须不受温度和侧向不水平的影响。
18.
Study on Width-Averaged 2-D Numerical Simulation for Tidal Flow;
潮汐水流宽度平均的垂向二维数值模拟研究