1.
Study on Sintering Systems of Ni-Zn Ferrites Doped with Al~(3+) by One-Step Synthesis
一步合成法制备Al~(3+)掺杂Ni-Zn铁氧体的烧结制度研究
2.
An Adaptive Control Scheme for Granulating Humidity Craft using PSO Algorithm
基于PSO算法的烧结制粒湿度自适应控制
3.
Influence of Thermal Annealing on Magnetic Properties of Nanostructured CoFe_2O_4 Ferrite Prepared by Combustion Method
甘氨酸燃烧法制备纳米晶CoFe_2O_4铁氧体及烧结温度对其磁性能的影响
4.
Test method for firmness of getter by pressure or sinter
GB/T9506.10-1988吸气剂压制或烧结牢固度测试方法
5.
And the pressured strength of the product increased by using multi-material configuration.
采用复合材料结构可提高烧制成品的抗压强度。
6.
Study on the Part Precision of Rapid Prototyping of Selected Laser Sintering;
选择性激光烧结快速成型制件精度的研究
7.
DESIGN AND REALIZATION OF INTELLIGENT TEMPERATURECONTROL SYSTEM FOR SINTERING FURNACE;
智能烧结炉温度控制系统的设计与实现
8.
Impact Factors of Gelatinous Material Strength Prepared by Sintering FGD Ash
烧结脱硫灰制备胶凝材料强度影响因素研究
9.
Effect of sintering temperature on properties of porous TiB_2-TiC multiphase ceramics
烧结温度对制备多孔TiB_2-TiC复相陶瓷性能的影响
10.
Effect of sintering temperature on microfiltration membrane prepared with TiO_2 ceramic-fiber
以TiO_2纤维制备微滤膜过程中烧结温度的影响
11.
Study on Temperature Control During the Sintering Procedure of PTFE Composites
聚四氟乙烯复合材料烧结过程温度控制研究
12.
Influence of Processing Parameters on Precision of Parts Made by Selected Laser Sintering
工艺参数对选择性激光烧结制件精度的影响
13.
Strengthen the Control of the Whole Process of Sintering And Keep the Stability of the Quality of Sinter
加强烧结过程控制与稳定烧结矿质量
14.
Distribution of mixture for adding fuel separately in the micropellet sintering processing must be notice, otherwise the heat system in sinter would be destroyed.
燃料分加小球团烧结时必须注意混合料布料问题，否则会破坏烧结过程热制度。
15.
STUDY OF IMPROVEMENT COMPOSITION OF SINTER’GRAIN SIZE IN No2 SINTERING PLANT OF THE XIANGGANG
改善湘钢二烧烧结矿粒度组成的研究
16.
Effect of diffent isothermal anneal on microstructure and flexible strength of machinable mica based glass-ceramics
不同退火制度对烧结法制备氟硅云母玻璃陶瓷性能的影响
17.
The Influence of the Burning Conditions on the Dissolution Properties of Burnt Gypsums;
煅烧制度对煅烧石膏溶解特性的影响
18.
Practice of Improving the Sinter Strength on the 90m~2 Sintering Machine in MaSteel;
马钢90m~2烧结机提高烧结矿强度的实践