1.
Research on Accounting Methods for Leftover Bits and Pieces of Industrial Materials;
企业生产过程中边角余料的会计处理方法
2.
A defective edge of a board caused by remaining bark or a beveled end.
缺角方木方木的由剩余树皮或斜角末端引起的缺损的边缘
3.
having the framed made of horn or tortoise shell or plastic that simulates either.
具有用角、龟壳或者仿制的塑料边框。
4.
Research of composition and TG-DTA of PCB scrap
PCB边角料的成分与热重-差热分析研究
5.
a complementary angle [arc]
【数学】余角 [弧]
6.
or can be used in the room of stay stitching to stabilize edges that are likely to stretch, such as bias cut edges and the edges of loosely woven fabrics
或用三角形布料以折边固定线缝的形式稳固会松散的边,例如斜裁的边和密度较松散面料的边。
7.
The secant of the complement of a directed angle or arc.
余割有向角的余角或弧的余割
8.
Get some carpet remnants, and cut them up to suit your needs.
可以把一些边角料裁成需要的形状补上。
9.
STUDY ON THE APPLICATION OF CARRAGEEAN OF RESTRUCTURED PORK FROM LEFTOVER MINCED PORK PRODUCTS
碎猪肉边角料重组中卡拉胶的应用研究
10.
complementary angle ;either of two angles which together make 90
余角(两角之和为90 这两个角就互为余角).,
11.
Remove excess solder with small brush while plastic( soft), leaving a fillet around end of valve as it cools.
在焊接部分成型后,用小刷子清除多余的焊料,使其在焊料冷却后形成一个环绕连接端口的圆角。
12.
The surface of inclined wedge pushes the triangle side of the waste and makes the plate move ahead, thus meeting the requirement of position setting and feeding the plate automatically.
斜楔插板上的斜楔面推动废边的三角槽一侧,使板料向前运动,达到板料定位和自动送料的目的。
13.
shaving allowance
(冲压用语) 修边余量
14.
Machine stitch 0.6cm (1/4 inch) from the raw edge and using pinking shears trim away excess fabric.
距毛边0.6cm(1/4)英寸处,缉缝一排线迹然后用花剪修剪掉多余的面料即可。
15.
Tth Maschke Theorem for Two-sided H-comodlue Coalgebras
双边H-余模余代数的Maschke定理
16.
A flat surface made by cutting off the edge or corner of a block of wood or other material.
斜面切去木块或其他材料的边或角后而形成的平面
17.
The reprocess fibre from waste, defective yarn and cloth rim charge in textile mills can be used in rotor spinning.
纺织厂回丝、纱及服装业边角料加工的再用纤维可用于转杯纺纱。
18.
Elementary Safety Analyasis of Collagen Protein from Chrome Shavings and Hide Offal;
铬革屑和皮边角料提取胶原蛋白的初步安全性分析