1.
The Assembling Art and Operation in Fields of Type-36-2 Borehole Deformeters
36-2型钻孔变形计的组装工艺及现场使用
2.
PRECURSORY ANOMALY OBSERVED BY DRILL-HOLE DEFORMETER PRIOR TO THE WUQIA EARTHQUAKE WITH MAGNITUDE 7.4 IN XINJIANG
新疆乌恰7.4级地震前钻孔变形计所观测到的前兆异常
3.
STUDY OF CRITICAL CONDITION OF BOREHOLE INSTABILITY IN GRANITE UNDER HIGH TEMPERATURE AND HIGH PRESSURE
高温高压下花岗岩中钻孔变形失稳临界条件研究
4.
ANALYSES OF INTERFERENCE IN BORE-HOLE STRAIN AND TUNNEL-ROOM DEFORMATION OBSERVATIONS
钻孔应变观测与洞室形变观测的干扰分析
5.
The investigation on chip deformation and cutting forces of BTA deep hole drilling
内排屑深孔钻削切屑变形与切削力实验研究
6.
The application of borehole inclinometer in the monitoring of accumulation body's strain
钻孔倾斜仪在某堆积体变形监测中的应用
7.
A needle-shaped drill for boring holes in rock or masonry.
钻头，钻石器，钻孔器用于在岩石或砖石上钻孔的针形钻
8.
Comparison between Grating Rosette and Strain Gage Rosette of Deformation Measuring in Hole-Drilling Method
钻孔法中光栅应变花与电阻应变花测量变形的比较
9.
Analysis of the boring prime pile aberrance at the shallow part by low strain integrity testing
冲(钻)孔灌注桩浅部桩身畸变低应变法检测波形分析
10.
the round part of the bit by which it is held in the drill.
钻头上的控制钻孔机的圆形部分。
11.
Deformation Analysis and Design, Construction Method of Borehole Cast-in-place Piles in Shanghai Region;
上海地区钻孔咬合桩的变形分析和设计、施工方法
12.
Research on the Principle and Design of Borehole Cast-in-place Pile and the Construction in Deep Excavation Next to Metro Station;
钻孔咬合桩受力变形规律及在地铁车站设计施工中的应用研究
13.
Research on Vertical Bearing Behavior and Deformed Mechanism of Supper-long hole Bored Pile in Xi an;
西安地区超长钻孔灌注桩竖向受荷承载性能及变形机理的研究
14.
Bearing and Deformation Characteristics Analysis of Long Single Bored Pile under Vertical Loading
竖向荷载作用下钻孔灌注长桩单桩承载变形特性研究
15.
Characteristics: This product, designed to locate the hole of the board in hole drilling, features good crimple resistance, heat resistance, burning resistance and deformation resistance.
本产品用于钻孔时对板的孔用，有一定的抗皱，抗热性，不易变形，不易烧焦等特点。
16.
To form, shape, taper, or enlarge(a hole) with or as if with a reamer.
扩，整用扩孔钻或仿佛是用扩张钻去造出、成形出、整出或扩大（某个孔）
17.
STEP HOLE DRILLING METHOD FOR MEASURING PLANE RESIDUAL STRESSES IN DEEP LAYER
钻阶梯形孔法测量深层平面残余应力
18.
Drilling and forming mechanisms of ground surfaces in engineering ceramics
工程陶瓷的磨削钻孔及表面形成机理