说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 大直径薄壳圆筒结构
1.
Research on the Three-dimensional Computing Method of Earth Pressure for Large-diameter Cylinder;
大直径薄壳圆筒结构筒后土压力的空间计算方法
2.
Study on the Bearing Mechanism and Optimization Design of the Embedded Large-diameter Cylinder Structure;
插入式大直径薄壁圆筒结构承载机理研究与优化设计
3.
Research on the Bearing Mechanism and Spring Element Numerical Simulation of the Bed Seated Large-diameter Cylinder Structure;
基床式大直径薄壁圆筒结构受力机理与弹簧元数值模拟
4.
Transient-dynamic-FEM Analysis of the Course of Vibration-driving the Thin-wall Large-diameter Cylinder Structure;
大直径薄壁圆筒结构振动下沉过程瞬态动力有限元分析
5.
The Research of Wave Load on the Large Cylindrical Structures;
波浪对大直径圆筒结构的作用力研究
6.
An Analysis on Seismic Response of the Sunk Large Diameter Cylindrical Structure
沉入式大直径圆筒结构地震响应分析
7.
Study on dynamic plastic displacement to large-diameter cylindrical structure
沉入式大直径圆筒结构的动力塑性变位研究
8.
Processing technique of prototype observation data for large-diameter cylinder wharf
大直径圆筒结构码头原型观测数据处理技术
9.
Numerical analysis on overturn center of embedded large diameter cylinder structure
沉入式大直径圆筒结构倾覆转动点数值分析
10.
The formula for calculating the additional soil mass and other parameters are deduced according to the characteristics of the large diameter cylinder breakwater.
根据大直径薄壁圆筒结构防波堤系统的特点,提出了其附加土质量和其它参数计算公式。
11.
Experimental Study and FEM Analysis on the Bearing Mechanism and Internal Force of Embedded Large-diameter Cylinder Structure;
沉入式大直径圆筒结构受荷模式和内力的试验研究与有限元分析
12.
Numerical simulation of wave force on large-diameter cylinders based on Boussinesq equations
基于Boussinesq方程对大直径圆筒结构上波浪力的数值模拟
13.
Research on the Dynamic Response of the Large-cylinder Shell Structure and Numerical Simulation of the Stochastic Wave Forces;
大直径圆柱壳结构动力响应及随机波浪力数值模拟研究
14.
Mathematical Optimization Model for Embedded Large-Diameter Cylindrical Shell Structure under Lateral Loads
横向荷载作用下插入式大直径圆柱壳结构的优化数学模型
15.
Dynamic Analysis Model of Bed Seated Large Diameter Cylinder Breakwaters under Random Wave;
随机波浪作用下座床式大直径薄壁圆筒防波堤动力分析模型
16.
Analysis on Riprap Work in a Large-diameter Cylinder with Reinforced Concrete Thin-wall
关于大直径钢筋混凝土薄壁圆筒内抛石施工的分析
17.
The research on the load bearing capacity of wedged-ring joint structure of thin-wall cylinder
薄壁圆筒楔环连接结构承载能力研究
18.
The Study of Spinning Precision Control for Thin Wall Cylinder with Large Length-diameter Ratio
大长径比薄壁圆筒旋压精度控制工艺研究