1.
The mathematical model and block diagram are presented to calculate the pick momentary cutting thick when the shearer drum is in the state of irregular motion.
给出了采煤机螺旋滚筒不均匀运动时截齿瞬时切削厚度计算的数学模型和程序框图。
2.
The Calculation of the Instaneous Thickness of Cutting Chip on the Shearer Helical Drum
采煤机螺旋滚筒瞬时切屑厚度的计算
3.
Simulation of 3-Axis Milling Based on Solid Model and Instantaneous Force
基于瞬时切削力和实体模型的三轴铣削仿真与试验
4.
Minimum Chip Thickness in Orthogonal Micro-cutting Based on Plasticity Strain Gradient Theory
基于应变梯度理论的正交微车削中最小切削厚度预测
5.
instantaneous state of velocity
瞬时速度, 速度的瞬时状态, 速度瞬时值
6.
When the cutting speed is over 500 metres per second, cutting temperatures decrease rather than increase.
当切削速度超过每秒500米时，切削温度下降而不是上升。
7.
It can also be used on alloys of medium merchantability in the lighter machining processes such as milling and turning.
同时它亦可用于中度切削性的合金钢，在轻加工如车削、铣削的润滑。
8.
Influence of Undeformed Chip Thickness on Surface Roughness-Spectral Analysis of the Profile of Machined Surface
切削厚度对加工粗糙度的影响——已加工表面轮廓的谱分析
9.
Calculation of the Ideal Surface Roughness Cut by Cutter with Round edge
圆弧刃刀具切削时理论粗糙度的计算
10.
Research on Feedrate Optimization for Mould Cavity Machining Based on Instantaneous Milling Force Model;
基于瞬时铣削力模型的模具型腔数控加工进给速度优化研究
11.
The effects of different cutting thickness on surface quality and slice quality are studied in this paper.
研究了不同切削厚度对竹材表面质量与屑片质量的影响。
12.
At first they saw nothing around them.
他们瞬时忘掉了一切。
13.
Modeling and Analysis on Cutting Force and Surface Roughness in Turning of High Temperature Alloy GH2132
车削高温合金GH2132时切削力和表面粗糙度的建模与试验分析
14.
Study on Cutting Temperature under Ultrasonic Hard Turning 45 Hardened Steel
超声硬切削45淬硬钢的切削温度研究
15.
The Effect of Cutting Conditions on the BuiIt.up Edge in Carbon Steel Cutting
切削碳钢时切削条件对积屑瘤的影响
16.
The choice of opportunity of cutting scab and escharectomy of Ⅲ degree alkali burns wounds and skin grafting
Ⅲ度碱烧伤创面切削痂与植皮时机的选择
17.
Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
18.
Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
文摘:斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。