1.
Valve Tappet Adjustment For Three And Five--Cylinder Engines
三缸与五缸内燃机气门间隙调整方法
2.
Improving the Assembly Process to the Washer for Adjusting the Valve Clearance in Diesel Engine by Measuring Tools
借助量具改进柴油机气门间隙调整垫片装配工艺
3.
valve-tappet clearance adjuster
气门挺杆间隙调节器
4.
The effects of five adjusting parameters of valve timing, admission valve clearance, emission valve clearance, rotational speed ,load rate are interacted.
配气相位、进气门间隙、排气门间隙、转速、负荷五个调整参数之间是相互影响的。
5.
"adjusting valve tappet clearances (also called adjusting valve lash), grinding valves and valve seats."
气门维修包括调校气门间隙(也称气门余隙),研磨气门和气门座.
6.
Hydraulic Valve Lash Adjuster (HLA) and Valve Train with HLA
液压气门间隙调节器及有间隙调节器的气门机构的研究
7.
Valve Lash Adjuster
气门间隙调节器又称液压挺杆
8.
Dynamic Simulation and Leakd-down Experiment of Valve Train with Hydraulic Lash Adjuster;
有液压间隙调节器气门机构的动力学模拟及泄沉特性试验研究
9.
Possessing a speed blades gap adjustingdevice, permit to adjust steplessly the blades gap.
刀片间隙快速调整机构，可对刀口间隙进行无级调整。
10.
Fit: Space relationship between characters which can be modified into a "loose fit"or a "tight fit"by expansion or reduction respectively.Also called Track.
字隙:字符与字符间的空位，它可以调整成为［松字隙］或［紧字隙］。
11.
light-single-acting automatic slack adjuster
轻便单向闸瓦间隙自动调整器
12.
adjust the spaces between words; in printing.
印刷时，调整单词间的空隙。
13.
The Operating Principle and Design for Auto-Interruption Regulating Arm
自动间隙调整臂工作原理及设计方法
14.
Optimizing design of sub-nanosecond gas switch with adjustable gap
可调间隙亚纳秒气体开关的优化设计
15.
Using Vibration Signal to Diagnose Abnormal State of Engine Valves Clearance;
基于振动分析的气门间隙异常故障诊断
16.
Valve Breakage. Any condition that causes the valve to overheat or to be subjected to heavy pounding (as from excessive tappet clearance or from detonation ) may cause valves to Break.
气门破裂:气门过热或遭受重载(气门杆间隙过大或爆裂)均可造成气门破裂。
17.
Valve sticking. Gum or carbon deposits on the valve stem will cause valve sticking. Excessive valve-stem clearance speeds up valve deposits.
气门沾着:气门杆上的胶质或积炭是造成沾着的原因。气门杆间隙过大会加速气门的积炭。
18.
Stand clear of the regulator and valve outlet, while opening the valve.
开启阀门时，躲开调整器和阀门排气口。