1.
Static stress calculation and optimization design of automobile wheel hub unite based on ANSYS
基于ANSYS的汽车轮毂单元静应力计算优化设计
2.
The Process Engineering and Numerical Simulation on Precision of Hub Unit Bearing;
轿车轮毂轴承单元精锻工艺设计及数值模拟
3.
The Process Engineering Analysis and Numerical Simulation on Precision of Hub Bearing Unit
汽车轮毂轴承单元精锻成形工艺分析及有限元模拟
4.
The hub of a wheel.
（轮）毂轮子的中心
5.
hob for cycle wheels (incl. coaster-braking hubs)
脚踏车车轮轮毂（包括倒轮刹车轮毂）
6.
The Finite-Element Numerical Simulation of the Bench Test of CAR A-Alloy Wheel;
轿车铝合金轮毂台架试验的有限元数值模拟
7.
A Finite-element Emulation Analysis of Motorcycle Wheel Hub Impact and Fatigue Damage
摩托车轮毂冲击及疲劳破坏有限元仿真分析
8.
Finite element analysis for strength of wheel hubs of large wind turbines
大型风力发电机轮毂强度的有限元分析与应用
9.
Moment Rigidity Analysis on Flange of Automotive Hub Bearings
轿车轮毂轴承轮毂凸缘力矩刚性分析
10.
The spokes of the wheel diverge from the nub.
轮辐从轮毂向四周分出。
11.
"That could be done with the spokes, not with the hub;
“绑轮辐，可以，绑轮毂，不行。
12.
Structure Design of Aluminum Alloy Wheelhub and Study on Counter-pressure Casting by Means of Finite Element Analysis
基于有限元分析的铝合金轮毂结构设计及差压铸造研究
13.
A round covering over the hub of the wheel of a motor vehicle.
毂盖机动车轮毂上的圆盖
14.
SMALLER DIAMETER OF PIVOT BEARING
轮毂轴承的较小直径端
15.
wheel hub bearing adjusting nut
车轮毂轴承调整螺母
16.
Install rotor on axle hub.
在车轴轮毂上安装转子。
17.
Hub And Bearing Assembly Mounting Surfaces
轮毂轴承组件固定面
18.
Two new spokes and a hub must be made.
我必须重新做两根轮辐和一个轮毂。