1.
A New Method for the Optimization of Practical Process System --Nonlinear Mapping Principal Axis Analysis Method
过程系统寻优新方法——非线性映射主轴分析法
2.
Study on Load Analysis Method for Diesel Engine Crankshaft Main Bearing Based on ADAMS;
基于ADMAS的柴油机曲轴主轴承载荷分析方法研究
3.
The Model Analysis of the Ceramic Bearing Electric Spindle;
陶瓷轴承电主轴主轴的振动模态分析
4.
Analysis and Treatment of Oil Leakage at Flange Coupling Rotor Spider and Main Shaft of Unit
机组转子支架与主轴联轴法兰处漏油分析及处理
5.
Design Method for High-speed Motorized Spindle Motor Based on Analysis of Harmonics
基于谐波分析的高速电主轴电机设计方法研究
6.
Discussion on the Assemble Technology of Wheel and Shaft for Driving Assemble of Overhead Travelling Crane
桥式起重机主动车轮组车轮与轴装配方法分析
7.
Hot-stability Analysis Method for Rotor Forging and Principal Spindle of Steam Turbine
汽轮机主轴和转子锻件热稳定性分析方法研究
8.
DYNAMIC ANALYSIS OF THE SPINDLE COMPONENTS OF NUMERICAL CONTROLLED MACHINE TOOL BASED ON FINITE ELEMENT METHOD
基于有限元法的数控机床主轴部件动态分析
9.
Mechanical Characteristics Analysis of NC Lathe Spindle by FEM
数控车床主轴力学特性的有限元分析方法
10.
Analysis on Spindle Rotor Critical Speed Based on Transfer Matrix Method
基于传递矩阵法主轴转子临界转速分析
11.
Numerical Simulation Analysis of Shaft Orbit for Hydraulic Generator Set;
水轮机主轴轴心轨迹的数值仿真分析
12.
Analysis of Axial Stiffness of Permanent Magnet Bearings by Using the Equivalent Surface Currents Method
基于分子电流法轴向永磁轴承轴向刚度的分析
13.
Design of High Speed Motorized Spindle and the Analysis of Joining Performances for Toolholder/Spindle Interfaces
高速电主轴设计及主轴/刀柄接口联接特性分析
14.
Research on the Condition Monitoring and Diagnosis Method of Main Bearing of Internal Combustion Engine;
基于振动分析的内燃机主轴承状态监测与故障诊断方法研究
15.
Structure Optimization and Numerical Simulation of Stress and Strain Fields for the Main Shaft Device of a Hoist
提升机主轴装置结构应力应变场数值模拟及优化分析方法
16.
Modle Analysis of Grinder Spindle System Supported with AMB Based on Finite Element Method
基于有限元方法的磁悬浮磨床电主轴转子系统模态分析
17.
Layout and Analysis of Machning Scheme for Finish Boring of Crankshaft and Camshaft Bore of Cylinder Block
精镗主轴孔和凸轮轴孔方案的制定与分析
18.
Performance Analyse and Test of Rolling Bearing on the High-Speed Spindle;
高速主轴用滚动轴承性能分析与试验研究