1.
Hyperbolic gear oil is recommended to be used in the differential gears in driving axles.
汽车驱动桥的差速器齿轮应采用双曲线齿轮油来润滑。
2.
curve-tooth bevel gear
弧齿伞齿轮，曲线齿锥齿轮
3.
Final gear ratio (Hypoid final gear)
主减速齿轮比(双曲线主减速齿轮)
4.
B-spline curves based on non-circular gear pitch curve design
基于B-spline曲线的非圆齿轮节曲线设计
5.
Choices of inner gear profile curve of rolling gear drive;
波式滚动活齿传动内齿轮齿廓曲线的选择
6.
hyperboloidal gear
双伞齿轮，双曲面齿轮
7.
Study on the Bending Strength of Large Module Involute Cylindrical Spur Gear;
大模数渐开线直齿圆柱齿轮弯曲强度研究
8.
single-grade reduction hyperbolic bevel gear
后桥单级减速双曲线伞齿轮
9.
Design of the Pitch-lines of Non-circular Gears Based on MATLAB;
基于MATLAB的非圆齿轮节曲线设计
10.
According to the special tooth structure of the Circular-Arc-Tooth-Trace cylindrical gear (CATT gear), an analysing model of its bending strength is established.
本文根据圆弧齿线圆柱齿轮轮齿的独特结构,建立了该齿轮的弯曲强度分析模型;
11.
The integral type housing, hypoid gear design has the centerline of the pinion set above the centerline of the ring gear.
集成型的差速室、准双曲面齿轮的设计中，小齿轮组中心线在环形齿轮的中心线之上。
12.
Study of Rebuilding Invisible Boundaries Between Adjoining Teeth from CT Images Based on Spline Curves
基于样条曲线重构CT牙列图像齿间丢失轮廓线
13.
Stress Analysis and Tooth Profile Optimization of Asymmetric Involute Gear with Two Pressure Angles;
双压力角非对称渐开线直齿轮的应力分析及齿廓曲线的优化
14.
Design and Curve Fitting for Axial Profile of Basic Worm of Planetary Cycloidal Gear Hob
行星摆线齿轮滚刀基本蜗杆轴向齿形设计与曲线拟合
15.
It is rapid and accurate in design and drawing the finger milling-cutter templet with CAD.
本文着重阐述了渐开线齿轮齿根过渡曲线的确定以及使用微机设计齿轮指形铣刀样板的方法。
16.
Study on the Profile Equation of the Rigid Gear of the Harmonic Chain Drive
链条谐波传动中刚轮齿廓曲线方程的研究
17.
Study on Fully Parametric Character of the Link Curves of Geared Five-bar Linkage
齿轮—五杆机构连杆曲线形状的全参数特性研究
18.
Research on Design Method, CAD and Applications of Pitch Curves of Non-circular Gears;
非圆齿轮节曲线的设计方法、CAD及应用研究