1.
Reaserch on Testing Defects in Barrel Surface of New Gun Clan;
新型枪族枪管内表面缺陷检测技术研究
2.
Ingot defects may be broadly classified into internal flaws and surface flaws. Internal flaws are caused by shrinkage.
钢锭缺陷广义上可分为内部缺陷和表面缺陷。内部缺陷是因收缩引起的。
3.
Total internal reflection microscopy:a subsurface defects identification technique in optically transparent components
光学元件亚表面缺陷的全内反射显微检测
4.
Surface defect terms
GB/T15757-1995表面缺陷术语
5.
unclean surface
不洁的[有缺陷的]表面
6.
Inspect for cosmetic acceptability per cosmetic defect inspection procedure.
依照表面缺陷检验程序做表面检验
7.
Research for Relationship between Steel Defects and Slabs Defects
带钢表面翘皮缺陷与板坯缺陷对应性关系研究
8.
An Important Method of Online Renovation of Gun Barrel Bore Surface Defect
火炮身管内膛表面缺陷在线修复的一种重要方法
9.
Research on effect of inner surface reinforcing on structure bearing capacity by model test in defective tunnel
内表面补强对缺陷病害隧道结构承载力影响的模型试验研究
10.
On System Function and Inherent Defect of Shareholders Voting Rights;
论股东表决权的制度功能与内在缺陷
11.
Slip- A defect pattern of small ridges found on the surface of the wafer.
划伤-晶圆片表面上的小皱造成的缺陷。
12.
Mound- A raised defect on the surface of a wafer measuring more than0.25 mm.
堆垛-晶圆片表面超过0.25毫米的缺陷。
13.
Pit- A non-removable imperfection found on the surface of a wafer.
深坑-一种晶圆片表面无法消除的缺陷。
14.
Waviness- Widely spaced imperfections on the surface of a wafer.
波纹-晶圆片表面经常出现的缺陷。
15.
COVERS REPAIR AND REPLACEMENT OF DEFECTIVE PARTS OF THE PRODUCTS.
表面的修复和产品缺陷部位的替换。
16.
Surface discontinuities of fasteners on nuts for general requirements
GB/T5779.2-1986紧固件表面缺陷--螺母--一般要求
17.
Research on the Methods of Recognition Based on Disfigurement of Zonal Steel Surface;
带钢表面缺陷智能化辨识方法的研究
18.
Design and Research of Recognition System on Railway Surface Defects;
钢轨表面缺陷识别系统的设计与研究