1.
Effect of Polyimide Additive on Pretilt Angle of Liquid Crystal
聚酰亚胺添加剂对液晶预倾角的影响
2.
Effect of Polyimide Alignment Film Manufacturing Conditions on the Pretilt Angle of Liquid Crystal;
聚酰亚胺取向膜制备条件对液晶预倾角的影响
3.
Effects of Variety of Liquid Crystals and Process Conditions on Pretilt Angle
液晶种类及工艺条件对预倾角的影响
4.
Fabrication of Zigzag Defect Free Ferroelectric Liquid Crystal Devices with Small Pretilt Angle
小预倾角无缺陷铁电液晶器件的制备
5.
Study on Pretilt Angle Induced by Polyimide Alignment Films with Side Chain Containing Biphenyl Unit;
联苯型侧链聚酰亚胺液晶取向膜预倾角的研究
6.
A study on polyimide alignment material for high pretilt angle liquid crystal display
高预倾角液晶显示器用聚酰亚胺定向材料的研究(Ⅱ)
7.
Distinguishing between Pretilt Angle and Weak Anchoring in Liquid Crystal Cell by Guided Optical Waves
用光学导波方法区分液晶盒中的预倾角与弱锚定
8.
Effect of Nozzle Outlet Angle on Fluid Flow and Level Fluctuation in a Beam Blank Casting Mould
水口倾孔倾角对异型坯结晶器流场和液面波动的影响
9.
(crystallography) having three unequal crystal axes intersecting at oblique angles.
（结晶学）有三个以倾斜的角度交叉的不同晶轴。
10.
the optimal inclination angle is from 70° to 90°and the optimal charging ratio is around 50%;
最佳倾角为70°~90,°最佳充液率在50%左右;
11.
Lean lens, it is not miracle but the amazing constructions.
倾斜的视角，与倾注的晶状体，不是奇迹的诞生，是建筑气韵的集合。
12.
Calculating of Pre-tilting Value for Angle Steel Inserted Type Base with Corner Tower
转角塔角钢插入式基础预倾斜值的计算
13.
The dip direction and dip angle of a subsurface interface must be first determined in three-parameter velocity analysis that needs predetermined dip angle.
采用预求倾角法进行三参量速度分析时,首先要确定地下界面的倾向和倾角。
14.
Application of low caving coal hydraulic support in thick coal seam with large tilt angle
低位放顶煤液压支架在大倾角厚煤层中的应用
15.
Study of the Simulation and Stability Technology of the Hydraulic Support in Deeply Inclined Coal Seam
大倾角液压支架整架仿真与稳定性技术研究
16.
Compution on Pressure Distribution of Stern Bearing Liquid Film Reckoning in Inclination of Stern Shaft
计入艉轴倾角的船舶艉轴承液膜压力分布计算
17.
Coordination of Full-mechanized Mining Equipments and Powered Support Design for Extremely Thin Coal Seam with Large Angle
大倾角极薄煤层综采设备配套及液压支架设计
18.
Effect of Inclination Angle and Liquid Filling Ratio on Operation Performance of Pulsating Heat Pipes
倾斜角及充液率对脉动热管运行性能的影响