1.
Simulation of Injection Moulding for AC Contactor Shell Based on Moldflow
基于Moldflow的交流接触器外壳注射成型模拟研究
2.
Position wiring harness (behind thermostat housing) to gain access to thermostat housing.
找到电线束（调温器外壳之后）以能够接近调温器外壳。
3.
Cover unused connectors with electrician's tape to prevent accidental contact.
用电工胶带缠好不用的连接器以防意外接触。
4.
The Strength Analysis of Heavy Automobile Transmission Case Based on Multi-part Contact;
基于多零件接触的重型汽车变速器壳体强度分析
5.
Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation
填充密度对中空纤维膜接触器精馏过程壳程传质的影响
6.
treadle rail contact
轨道接触器， 踏板
7.
liquid-liquid centrifugal contactors
液--液离心接触器
8.
For instance, you should make sure that the insulations between the soldering tweezers and welding cable are ok and the earthing point and each termipoint of soldering machine are in good condition.
如焊钳和焊接电缆的绝缘是否有损坏的地方，焊机的外壳接地和焊机的各接线点接触是否良好。
9.
direct heat exchanger
直接接触式热交换器
10.
Connect the upper radiator hose and heater hose at the engine thermostat housing.
在引擎恒温器外壳上，连接上散热器软管和加热器软管。
11.
capacitor changeover contactor
切换电容器式接触器
12.
The Influence of Apertures Direction on Shielding Effectiveness of Connector Enclosure;
连接器外壳接线孔的方向对其电磁屏蔽性能的影响
13.
axially-split casing
有轴向接合缝的外壳
14.
non-contact scanning detector
非接触式扫描检测器
15.
anaerobic contact digestor
厌氧接触（型）消化器
16.
suspended solid contact reactor
悬浮固体接触反应器
17.
rocking-contact speed regulator
振动接触式速度调节器
18.
converter, vibrating contact, electric
振动接触换流器,电动的