1.
RELATION BETWEEN THE HARDNESS OR THE DENSITY OF WOOD AND THE CUTTING POWER IN WOOD CUTTING
木材切削中木材硬度及密度与切削功率的关系
2.
Study on the Wear-behavior of Woodworking Tools for to Optimize Machining Wood;
![点击朗读](/dictall/images/read.gif)
木工刀具磨损特性与木材切削加工优化的研究
3.
The Study of the Micron Wood-cutting and High Intensity Fiber Board Manufacture Theory;
![点击朗读](/dictall/images/read.gif)
微米级木材切削理论及新型人造板材构建研究
4.
Study on Virtual Simulation of Wood Cutting Process Based on Three-dimensional Model and Geometric Parameter Optimization for Wood Tool
三维木材切削虚拟仿真与木工刀具参数优化研究
5.
a power tool for smoothing or shaping wood.
![点击朗读](/dictall/images/read.gif)
用来切削木材的能量工具。
6.
Effect of Wood Grain Direction on Acoustic Emission during Routing
![点击朗读](/dictall/images/read.gif)
木材纵横向切削过程中的声发射特性
7.
The Experiment Study on Wood Characteristic and the Number Simulation of Cutting Process;
![点击朗读](/dictall/images/read.gif)
木材材性的实验研究及切削过程的数值模拟
8.
STUDY ON THE OBLIQUE CUTTING OF WOOD--The Relations Between Cutting Forces And Bevel Angles of Cutting Edge
关于木材斜角切削的研究——切削力与刃倾角的关系
9.
STUDIES ON THE RELATIONSHIP BETWEEN WOOD DENSITY AND CUTTING RESISTANCE WITH KOREAN PINE AND MANCHURIAN ASH
红松、水曲柳木材密度与切削阻力关系的研究
10.
Application of Self-made Dynamometer in Measuring Three-dimensional Cutting Forces of Wood
自制测力仪用于木材三向切削力的测定
11.
The cutting tool must be harder than the material to be cut.
![点击朗读](/dictall/images/read.gif)
切削刀具必须比要切削的材料硬。
12.
He whittled the wood into a spoon.
![点击朗读](/dictall/images/read.gif)
他把木材削成一支汤匙。
13.
To cut small bits or pare shavings from(a piece of wood).
![点击朗读](/dictall/images/read.gif)
削从(一块木头)上切下小片或削去皮
14.
machining of difficult-to-cut metals
![点击朗读](/dictall/images/read.gif)
难加工金属材料的切削
15.
Effects of Milling Parameters for Bamboo on Its Milling Qualities and Unit Cutting Work
![点击朗读](/dictall/images/read.gif)
铣削参数对竹材铣削质量与单位切削功的影响
16.
cutting power per unit material removal rate
![点击朗读](/dictall/images/read.gif)
单位材料切除率的切削功率
17.
Test Studies and Design on Cutting Mechanism of Grafting Machine;
![点击朗读](/dictall/images/read.gif)
苗木嫁接机切削机构试验研究与设计
18.
PREDICTION OF THE CUTTING FORCE IN END MILLING OF DIFFICULT-TO-MACHINE MATERIAL POCKETS
![点击朗读](/dictall/images/read.gif)
难加工材料型腔圆角数控铣削的切削力预测