1.
The grooves into which they fit are called ring grooves.
安装活塞环的凹槽称为活塞环槽。
2.
Most pistons have three ring grooves at the top.
大多数活塞的顶部有3个活塞环槽。
3.
"Sometimes, all that is required is to free up the rings in the ring grooves by cleaning out carbon."
有时,所要做的仅仅是清除积碳,使活塞环在活塞环槽中活动自如。
4.
Study and Optimization of Parameter on Cutting Tool for Eutectic Alpax Piston Ring Groove
共晶铝—硅活塞环槽精切刀具研究及参数优化
5.
Be sure that you do not remove metal when cleaning ring grooves or oil slots.
清洁活塞环槽或油环开缝,绝对不能损伤金属部分。
6.
Study on Surface Intensify Disposal and Abrasion Performance of Locomotive Engine Piston Ring Groove;
机车发动机活塞环槽表面强化处理及摩擦磨损性能研究
7.
"Thus, piston rings must be used to provide the necessary seal. The rings are installed in grooves in the piston. Actually, there are two types of rings, compression rings and oil-control rings."
所以活塞环就用来提供必要的密封。活塞环装在活塞的凹槽中。事实上有两种活塞环,气环和油环。
8.
Piston Ring Groove Depth – #1&2
活塞环凹槽深度– #1&2
9.
) The inside surface of the ring fits in the groove on the piston.
)些环的内表面和活塞上的凹槽相配合。
10.
In simplest terms, piston rings are thin, circular pieces of metal that fit into grooves in the tops of the pistons.
简单地讲，活塞环就是装在活塞顶部的凹槽里的薄，圆的金属。
11.
slotted spring-finger plunger
带有弹簧销的槽式活塞
12.
piston ring plier(piston ring tongs)
活塞环钳（活塞环拆装钳）
13.
"Then, when pressure is applied to the tool handles, the ring is sprung enough that it can be lifted out of the ring groove and off the piston sprung enough that it can be lifted out of the ring groove and off the piston."
然后用力压住工具手柄,使活塞环足以弹起,即可使之从环槽中脱出,而将其从活塞上取下。
14.
The rings have joints (they are split) so that they can be expanded and slipped over the piston head and into the recessed grooves cut in the piston.
活塞环有接口(也就是有一缝隙)．这样可以使端部扩张并滑人活塞上的凹槽中。
15.
piston pin snap ring
活塞销锁圈, 活塞销扣环
16.
piston diameter at ring lands
活塞环处的活塞直径
17.
flex-vent oil ring
(活塞) 挠性油环
18.
Study on Anti-wear Coating and Tribology Performance of 280 Internal Combustion Engine Piston Ring Groove;
280型内燃机活塞钢顶环槽抗磨减摩涂层及其摩擦副摩擦学性能的研究