1.
Microstructure and Mechanical Property of Joint by Amorphous Fillers
非晶镍基钎料钎焊接头性能及微观组织的研究
2.
Brazing of IC10 superalloy with Ni-based brazing fillers using Hf and Zr as melting-point depressants
Hf与Zr为降熔元素镍基钎料对IC10合金的钎焊
3.
The Research on Brazing Process betweeen W-Cu Heat Sink with Plated Nickel and Silver-copper Solder
镀镍钨铜与银铜焊料钎焊工艺的研究
4.
Study on Arc Brazing of Nickel-Based Alloy and Stainless Steel;
镍基合金与不锈钢电弧钎焊工艺研究
5.
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
6.
spelter brazing alloy
铜锌基硬钎焊料合金
7.
Effects of Brazing Temperature on Vacuum Joint Microstructure and Microhardness of Inconel Superalloy
钎焊温度对镍基合金真空钎焊接头组织及硬度的影响
8.
Study on Brazing of Cemented Carbide to Steel Using Cu-Based Microcrystalline Brazing Alloy Foils;
基于Cu基微晶钎料的硬质合金/钢钎焊试验研究
9.
Interface structure and strength analysis of brazed GH3044 nickel-based alloy joint
GH3044镍基合金钎焊接头的界面组织和强度分析
10.
Finite element simulation of thermal stress on brazed K24 nickel-based joint
K24镍基合金钎焊接头热应力的有限元模拟
11.
Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B Joint
Zn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能
12.
Study on Cu-based Filler Metal Brazed Composite Coating with Particle Reinforced;
铜基钎料钎焊颗粒增强复合涂层的研究
13.
Effect of Alloy Element Addtion on IMC at the Soldering Interface of Sn-based Binary Solders;
合金元素对二元Sn基钎料钎焊界面IMC的影响
14.
The Manufacturing of Filler Metal and the Joining of TiAl Alloys;
TiAl基合金高温钎焊钎料配制及连接工艺研究
15.
Vacuum Brazing Aluminum Matrix Composites with Low Melting Point Solder Development
真空钎焊用低熔点铝基复合钎料的研制
16.
Microstructure and Properties of Vacuum Brazing C_f/C Composites Using Reactive Al Based Filler Metals
铝基活性钎料真空钎焊C_f/C复合材料焊接接头的组织及性能
17.
Brazability of SiC Particulate Reinforced Aluminium Metal Matrix Composites
SiC颗粒增强铝基复合材料的钎焊性
18.
Effect of Ge on Oxidation Resistance of Sn-0.3Ag-0.7Cu Lead-free Solder
Ge对Sn-0.3Ag-0.7Cu基无铅钎料抗氧化性影响