1.
The Analysis and Research for the Mechanism of Ultimate Torsion Strength of Prestressed Concrete;
预应力混凝土抗扭强度机理的分析与研究
2.
Design of Screw Thread for Drill Collar of High Torque Connections and Finite Element Analysis
高抗扭强度钻铤螺纹设计及有限元分析
3.
The degree or angle of torsional stress.
扭力的强度，扭力的角度
4.
Stability Analysis (Buckling Strength) of Members in Resistance Damage Structures under Torsion;
抗损结构中构件扭转稳定性（构件屈曲强度）分析
5.
compressive strength, compression strength
抗压强度,耐压强度
6.
TORSIONAL RIGIDITY OF UNDER-REINFORCED CONCRETE SLABS
钢筋混凝土适筋板式构件的抗扭刚度
7.
alternating bending strength
(包装材料反复扭折的)耐折强度
8.
A Practical Test Analysis to the Dynamical Strength of the Damping Twisted Bar for a Small Truck
小型货车减振扭杆的动强度实测分析
9.
ULTIMATE STRENGTH OF REINFORCED CONCR- ETE I-BEAM UNDER PURE TORSION
受纯扭钢筋混凝土Ⅰ形梁的极限强度
10.
Bending and Torsion Strength Analysis of the 8500TEU Container Vessel;
8500TEU集装箱船整船弯扭强度分析
11.
Raise the Strength of cost and Capital Management and Administration Enhance the Enterprise s capability of Turning loss into Gain;
提高成本资金管理强度 增强企业扭亏增盈能力
12.
On the Application of Eliminating Anti-translation of Context in Reversing Over-variation of Translation;
克服语境抗译性在扭转翻译过度变形中的应用
13.
On the Influence of Abutment Torsional Stiffness and Width-span Ratio to the Stress of Skew Arch Bridge
桥台抗扭刚度及宽跨比对斜交拱桥受力的影响
14.
Testing method for torsional shear strength of doedl joint by inorganic adhesives
GB/T14903-1994无机胶粘剂套接扭转剪切强度试验方法
15.
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
GB/T3632-1995钢结构用扭剪型高强度螺栓连接副
16.
Design of a Test Rig for Static Torsional Strength with Electro-hydraulic Proportional Control
电液比例控制的静扭强度试验装置的设计
17.
Investigation of shear strength and modulus of fresh water ice by torsional tests
用扭转试验研究淡水冰的剪切强度及模量
18.
PARAMETRIC OPTIMIZATION ON CABLE ATTACHMENTS TO MAXIMIZE TWIST STIFFNESS OF CABLE-SUPPORTING SYSTEM
增强索支撑系统扭转刚度的索连接位置优化