1.
Influence of Fluoride on the Workers Health in Steel-Making Industry;
电渣重熔炼钢作业氟化物对工人健康的影响
2.
a refractory-lined furnace used to convert pig_iron into steel by the Bessemer process.
用贝西默炼钢法把杂铁炼成钢的难熔炉。
3.
Kelcaloy method
凯尔卡洛依高级合金钢熔炼法
4.
An Aporoach to Melting Process of Stainless Steel with 0.2%￣0.4%S
含硫量0.2%～0.4%的不锈钢熔炼工艺
5.
VIM Refining Extra-Low Oxygen Steel using CaO Crucible
用氧化钙坩埚真空感应熔炼超低氧钢
6.
Melting the High Quality Bearing Steel by ESR Technology
采用电渣重熔工艺冶炼高质量轴承钢
7.
The electric arc steelmaking process may be divided into the following four stages: charging, melting, refining and tapping.
电弧炉炼钢可以分为以下4个阶段:装料，熔化，精炼和出钢。
8.
Measures of Increasing Lining Life of EBT EAF for Smelting Stainless Steel
提高熔炼不锈钢电弧炉炉衬寿命的措施
9.
Influence of Oxygen Contamination from Crucible Material on Deep Deoxidation of Molten Steel during Vacuum Induction Melting;
真空感应熔炼过程炉衬供氧对钢液深脱氧影响
10.
Research of Ladle Deoxidized Slag Used as Flux to Make Silicon-manganese
钢包脱氧渣做熔剂冶炼硅锰合金的探索
11.
PRIMARY EXPLORING FOR SMELTING MANGANE-SESILICON WITH DEOXIDIZING SLAG AS FLUX
“转炉钢脱氧渣”做熔剂冶炼锰硅合金的初步探索
12.
Process Control of Low-Phosphorus and Sulfur Alloy Steel Melting by Basic Induction Furnace
碱性感应电炉熔炼低磷硫合金钢的工艺控制
13.
Bessemer process:a method for making steel by blasting compressed air through molten iron to burn out excess carbon and impurities.
贝塞麦炼钢法:吹入压缩空气通过熔融的钢铁以燃尽多余的碳和杂质的一种炼钢方法。
14.
All high-quality tool steel and high-speed steel was long made by the crucible process.
在很长的一段时间内,所有优质工具钢和高速钢都是用坩埚法熔炼。
15.
A furnace in which pig iron is converted into steel by the Bessemer process.
炼钢熔炉一种通过酸性转炉法将生铁练成钢的设备
16.
Behavior of Nitrogen in High Nitrogen Steel Melting Processes and Influence of Nitrogen to the Corrosion Resistance of Stainless Steels;
氮在高氮钢熔炼过程中的行为及氮对不锈钢耐腐蚀性能的影响
17.
liquation process
熔析法 -金属精炼
18.
PENETRATION LENGTH OF A SIDE-BLOWN OXYGEN JET BY IMMERGED LANCE IN MOLTEN STEEL BATH
潜入侧吹氧气流股在炼钢熔池中的穿透长度的研究