1.
spin-forming and flow-forming machines
旋压成形机床和滚压成形机床
2.
Spin-forming numerical simulation of cup-shaped inner meshing gear
杯形内啮合齿轮旋压成形的数值模拟
3.
Experimental research on spin-forming of cup-shaped thin-walled trapezoidal inner-gear
杯形薄壁梯形内齿旋压成形工艺的试验研究
4.
NUMERICAL SIMUL ATION OF THICK WALL HEAD WARM FORMED BY MOULDLESS SPINNING;
厚壁封头无胎温旋压成形的数值模拟
5.
FE simulation on the ball spinning forming of inner grooved copper pipe
内螺纹铜管滚珠旋压成形有限元模拟
6.
Experimental research on ball spinning of thin-walled stainless steel tube
薄壁不锈钢管滚珠旋压成形工艺研究
7.
Spinning Technology Based on Principle of Continuous Multipoint Forming
基于连续多点成形原理的旋压成形技术
8.
Design of Tool and Experimental Study with Respect to Ball Spinning Forming of Thin-walled Tubular Parts
薄壁筒形件滚珠旋压成形工装设计及实验研究
9.
Study on Ball Spinning of Tubular Parts with Longitudinal Inner Rib
纵向内筋筒形件滚珠旋压成形的工艺研究
10.
Effects of Power Spinning Processing Parameters on Cylinders of TC4 Alloy
强旋工艺参数对TC4钛合金筒形件旋压成形的影响
11.
Research on Forming Mechanism of Multi-Pass Conventional Spinning Process and Influence of Roller-trace on the Process;
多道次普通旋压成形机理与旋轮运动轨迹作用的研究
12.
Finite Element Simulation of Process for Multi-Cycle Spinning and Pulley Spinning
多道次拉旋及皮带轮旋压成形工艺的有限元模拟研究
13.
Hot Spinning Process of Titanium Alloy Collar Rim of Lunar Rover
月球车钛合金轮圈的热旋压成形工艺研究
14.
Research on the Turning-forming of Thin and Complicated Contour Surface;
复杂曲面、薄壁件精密旋压成形技术研究
15.
FE Analyses on Process of Mould Ring Power Spinning and Optimization of Techniques;
模环旋压成形过程的数值模拟与工艺优化
16.
Research on Tube Spinning Process and Properties of Cast Titanium Alloy
铸造钛合金管坯的旋压成形及性能研究
17.
Study on Spinning Process of Splitting V Type Belt Wheel
V型劈开式皮带轮旋压成形过程的分析
18.
Research on the Power Spinning of Cone Parts with Discontinuous Wall Thickness Using 3D FEM and Experimental Investigation;
突变壁厚锥形件强力旋压成形有限元模拟和试验研究