1.
Finite Element Simulation of Influence of Tool Edge Radius in Micro-milling
![点击朗读](/dictall/images/read.gif)
微铣削加工刀具刃口半径影响的有限元模拟
2.
The cutting edge radius of the tools is minimized less than0.05μ m and the radius waviness of the tools is improved no more than0.2μ m.
刃磨出的金刚石刀具刃口半径值可以达到0.05μ以下,刀尖圆弧圈度提高到0.2μ以内。
3.
Cutting Tool Shape Radius Recompense Inaccuracy Analysis by Grinding Crucial Point CNC Turning Cutting Tools
数控车削刀具的刃磨引起的刀尖半径补偿的误差分析
4.
EDG Technology of PCD Tool with Internal Cutting Edges
![点击朗读](/dictall/images/read.gif)
内凹刃口PCD刀具电火花刃磨工艺
5.
"Webley 1.5" pistol"
![点击朗读](/dictall/images/read.gif)
威百利吋半口径短催泪枪
6.
Rounded-entry driveway. Corner radius can be specified.
![点击朗读](/dictall/images/read.gif)
入口为圆角的车道。可指定拐角的半径。
7.
4-corner intersection curb. Corner radius can be specified.
![点击朗读](/dictall/images/read.gif)
四角十字路口路缘。可指定拐角的半径。
8.
He turned the edge of the knife.
![点击朗读](/dictall/images/read.gif)
他使刀口卷刃[变钝]。
9.
That knife has a sharp edge.
![点击朗读](/dictall/images/read.gif)
那把刀的刃口锋利。
10.
Relationship between microstructure and properties and failure mechanism of knife-edge with small angle
薄刃刀具刃口失效机制与材料组织性能的关系
11.
Some have as few as two cutting edges and others have 30 or more.
![点击朗读](/dictall/images/read.gif)
有些铣刀只有两个刃口,而有些铣刀却有三十或更多的刃口。
12.
As the tool softens due to heat, it wears and Breaks down at the cutting edge or face.
![点击朗读](/dictall/images/read.gif)
在刃口因高温而软化的同时,刀具刃口便开始磨耗并损坏。
13.
with the edge forward or on, by, or toward the edge.
![点击朗读](/dictall/images/read.gif)
刃口朝前,在边上,从边上,向边上。
14.
The blade of this shape is very rigid and sharp!
![点击朗读](/dictall/images/read.gif)
倘有,这型制之刃口是特别硬及?利的!
15.
Experiment and Numerical Simulation of Laser Quench on Die Blade
![点击朗读](/dictall/images/read.gif)
模具刃口的激光淬火试验与数值模拟
16.
Influence of Drill's Edge Preparation on Drilling of 42CrMo
![点击朗读](/dictall/images/read.gif)
钻头刃口处理对钻削加工42CrMo的影响
17.
One of the doors on the main cabin level will be sized for the turning radius of a coffin.
主舱层有一扇舱门的尺寸足以满足一口棺材的转弯半径。
18.
double radius button head snap
![点击朗读](/dictall/images/read.gif)
双半径半圆头铆钉窝子