1.
Characteristics of Cutting Forces Based on Wavelet Analysis
基于小波分析的切削力信号特性研究
2.
Research on Real-time Monitoring System of Cutting Force Based on DSP and FPGA
基于DSP和FPGA的切削力信号实时监测系统的研究
3.
The results show that the periodicity of correlation signals and the distribution of main peaks in the cutting force spectrum are different as the change of characteristics of materials.
结果表明：材料性质不同，相关信号的周期性明显不同，切削力信号频谱的主峰分布也有所不同。
4.
Experimental Investigation of Sound Signals during Machining Process;
切削加工过程中声音信号的实验研究
5.
A Study on the Separation of Cutting Acoustic Emission Signals by Maximum Entropy Spectrum Method
用最大熵谱法分离切削声发射信号的研究
6.
Research on Tool Wear Recognition Based on Cutting Sound Signals;
基于切削声音信号的刀具状态识别研究
7.
The experimental study on high-speed near dry cutting based on monitoring of the acoustic emission signals
基于声发射信号监测的高速准干切削试验研究
8.
Research on Cutter Wear State Recognition Base on Milling Force Signal;
基于铣削力信号的刀具磨损状态识别研究
9.
Cutting Force Modeling in Turning Based on Cutting Parameters in Face Cutting;
基于切削参数的端面加工切削力模型
10.
Research on Monitoring Technique for Tool Wear Based on Cutting Sound Signal;
基于切削加工声音信号的刀具状态监测技术基础研究
11.
STUDY ON CUTTING FORCE IN RECTANGULAR GROOVE CUTTING AND SIDE DEFORMATION OF CHIP
矩形槽切削的切削力及切屑横向变形的研究
12.
bit's directional cutting ability
钻头的定向切削能力
13.
Predicting Cutting Force With C++ Builder
基于C++ Builder的切削力预测
14.
The investigation on chip deformation and cutting forces of BTA deep hole drilling
内排屑深孔钻削切屑变形与切削力实验研究
15.
Cutting Performance and Cutting Force Prediction Research of Super Alloy with Thermal Sprayed Coatings;
高温合金热喷涂层切削性能及切削力预报研究
16.
Theories and Experiments of Plunge Milling Cutting Force and Temperature on Titanium Alloy;
钛合金插铣切削力及切削热理论与实验研究
17.
The FEM Simulation of Cutting Force in Orthogonal Metal Cutting Process;
金属正交切削加工中切削力的有限元模拟
18.
Experimental Study on Cutting Force Changing Laws in High-speed Cutting Machining
高速切削过程中切削力变化规律试验研究