1.
The key technical research in interference-free tool path of torus cutter
圆角刀无干涉刀具轨迹关键技术研究
2.
Study on Calculation Method of Non-interference Cutter Pass for Complex Surfaces with NC Machining;
复杂曲面数控加工无干涉刀位轨迹的计算方法研究
3.
Tool Path Calculation of NC Machining Based on Actual Profile of Cutter
基于刀具实际廓形的数控加工刀具轨迹计算
4.
Offset Algorithm Based Tool-path Planning for NC Machining;
基于等距法的数控加工刀具轨迹规划
5.
The Tool Path Generation Software System for 2Dimensions Numerical Control;
二维数控刀具轨迹自动生成软件系统
6.
Pocket tool path optimization in high speed milling;
型腔高速铣削加工刀具轨迹优化研究
7.
Tool Path Planning for High Speed Milling of Free-form Surface with Toroidal Cutter
环形刀具高速铣削自由曲面轨迹规划
8.
Interference Aviodance in Sculptured Surfaces Machining and Tool Path Planning
复杂曲面加工干涉避免及轨迹的规划
9.
System for Tool Path Generation of 2D Contour Milling of Die;
模具二维轮廓铣削加工刀具轨迹生成系统
10.
Research on Tool-path in the Process of Sculptured Surface NC-machining;
复杂型面NC加工过程中刀具轨迹的研究
11.
Research on High Speed Milling Forces and Cutter Path Optimizing;
高速铣削切削力变化及刀具轨迹优化研究
12.
Tool-path Programming Based on Reverse Engineering in NC Machining;
基于反求的数控加工刀具轨迹的路径规划
13.
Research on Technical Parameters and Cuttingtool Path of NC Machining Process;
数控切削加工工艺参数及刀具运动轨迹的研究
14.
Research on Techniques of Information Extraction and Toolpath Planning Based on STEP-NC;
基于STEP-NC的信息提取及刀具轨迹规划技术研究
15.
Research on Direct Generation of NC Tool Path from Point Cloud;
基于点云的数控加工刀具轨迹直接生成的研究
16.
Research on the Prototype System of Tool-Path Based on Three-Dimension;
基于3D的刀具轨迹显示原型系统的研究
17.
Multi-axis Machining NC Tool Path Generation for Centrifugal Impeller;
离心叶轮多坐标数控加工刀具轨迹规划
18.
Technology of Generating NC Tool Path for Subdivision Surfaces Based on Catmull-Clark Scheme;
基于Catmull-Clark模式的细分曲面NC刀具轨迹生成技术