说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 连接压力
1.
Effect of Bonding Pressure on Transient Liquid Phase Bonding Process and Joint Properties of T91/12Cr2MoWVTiB
连接压力对TLP连接T91/12Cr2MoWVTiB过程及接头性能的影响
2.
Effect of Bonding Pressure on Microstructure and Properties of TLP Joint of 20 Steel Pipes
连接压力对管道瞬时液相连接接头组织性能的影响
3.
Lock the hydraulic connector and test the connecting force with 50.000 lbs overpull.
销紧液压连接器用50000磅试验连接拉力。
4.
Connect differential pressure switch wire to the combination valve.
连接差速压力开关线至组合阀。
5.
Bonnet Joint– joint design varies with ANSI class rating.
(1) 阀盖连接-ANSI压力等级不同,连接结构也有所不同。
6.
Specialize in connector press pieces of factory devoted to connector, connector become always, golden cup lay axle, shock absorber, rubber press production and processing of one.
专业生产连接器冲压件厂一直致力于连接器、接器总成、杯下轴、震器、胶冲压件的生产和加工。
7.
Compression type terminal lugs and ferrules for power cables with copper or aluminium conductors
GB/T14315-1993电力电缆导体用压接型铜、铝接线端子和连接管
8.
joint contact surface
连接接触面总压紧载荷
9.
To examine diaphragm, disassemble coupling nut (6) and lift off pressure plate (7).
检查隔膜,拆卸连接螺母(6)并提升压力板(7)。
10.
Hydraulic system supplied large punching and riveting force.
采用柱塞式液压系统,冲铆力大,角连接强度高。
11.
Numerical Modeling Method for the Clip Connecting Profiled Metal Slab s Ultimate Resistance;
扣合连接压型钢板承载力有限元数值模拟
12.
The Improvement of Connecting Pin-lubrication in Tension Roller Compactor Frame
张力压紧辊架连接销轴润滑方式的改进
13.
Experiment on Bearing Capacity of Single Angle Struts with One-sided Bolt Connection
单面螺栓连接单角钢压杆的承载力试验
14.
EXPERIMENTAL STUDY ON THE MECHANICAL PROPERTIES OF HIGH STRENGTH ANGLE STEEL ATTACHED BY ONE LEG
单边连接高强角钢受压力学性能的试验研究
15.
Analysis of rigid transmission connection between press and switched reluctance motor
压力机与开关磁阻电机刚性传动的连接分析
16.
Safety Assessment of Unburied Penstock in Front of Globle Valve in Hydroelectric Power Plant
水电厂球阀前压力钢管连接明段的安全评价
17.
Motor vehicles and towed vehicles--Pressure test connection for compressed-air pneumatic braking equipment
GB/T5922-1986汽车和挂车气压制动装置压力测试连接器
18.
Check that the hydraulic installation is able to withstand the maximum pressure engraved on the accumulator.
确认所连接的液压设施可承受储能器所标明的最大压力。