说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 滚齿加工
1.
The ring teeth hob can realize high efficient radialfeedhobbing.
环纹滚刀可以实现高效率的径向进给滚齿加工
2.
Research and Development on Numerical-control-based Auto-programming Technology for Rolling-gear Machine;
数控滚齿加工零编程技术的研究与开发
3.
Research and Developmeng on Auto-programming System for CNC Gear-hobbing
数控滚齿加工自动编程系统的研究与开发
4.
Research on application of cryogenic cold air in hobbing process
低温冷风技术在滚齿加工中的应用研究
5.
The New Method of Ausform Finishing Process for Hardened Gears;
热滚挤精加工硬齿面齿轮工艺新方法
6.
The range of gears cut by the hob of small pressure angle
小压力角滚刀加工齿轮的齿数范围
7.
Mobbing Chip flutes of Milling Cutters by Means of using an Involute Gear Hob
利用加工渐开线齿轮滚刀滚切铣刀容屑槽
8.
The Vibration Analysis and Computer Simulation for Hobbing and Shaving of Harden Gear;
硬齿面滚剃齿加工振动分析及计算机仿真
9.
The Design of the Clamp Hastle of Manufacturing the Short Shafts in Y3150E Hobbing Machines;
在Y3150E滚齿机床上加工轴齿轮的夹具设计
10.
Design of templet for drum gear based on YW3180 hobbing machine
基于YW3180型滚齿机加工鼓形齿的靠模设计
11.
Research of CNC Gear-hobbing Technology on Three Order Ellipse Helical Gear;
三阶椭圆斜齿轮数控滚切加工的研究
12.
This machine tool use hobbing cutter adopt continuous cent tooth means roll cut, cans process straight teeth and a garden of stud gear or worm gear。
本机床用滚刀采用连续分齿方法滚切,可加工直齿及园柱齿轮或蜗轮。
13.
The authors proposed a high-efficiency CNC generating method for cylindrical gear with arcuate tooth traces, by means of a standard hob and studied the bobbing mechanism.
提出了一种利用标准齿轮滚刀滚切圆弧齿线圆柱齿轮的数控加工方法。
14.
Research and Application on NC Zero-programming for Gear Hobbing;
零编程技术在齿轮数控滚削加工中的应用研究
15.
Forming a spherical hob cutter in a general 5-axis milling machine
基于通用五坐标数控铣床的球形滚刀铲齿加工
16.
Research of Simultaneouscontrol Model for Hobbling Three Order Ellipse Helical Gear
三阶椭圆斜齿轮滚切加工联动控制模型研究
17.
The Research on Generating Cutting Manufacture Device Utilized in Manufacture Bevel-Cycloid Gear and the Device Apply in Hobbing Machine
锥摆线齿轮范成法加工装置及其在滚齿机上的应用研究
18.
Research on the Gear Hobbing Process Planning for Green Manufacturing and Its Application;
面向绿色制造的齿轮滚切加工工艺规划及其应用