1.
Extrusion Foaming Behavior of Different Polypropylene Foaming Systems;
不同聚丙烯发泡体系的挤出发泡行为研究
2.
The Effect of the Normal Cell Number on Expansion Ratio in PP Foaming System
聚丙烯发泡体系中当量泡孔数对膨胀率的影响
3.
The results of experiments showed the swell ratio model established in this paper could be applied to the predication of swell ratio of PP foam system.
通过结果检验可知，本文确立的胀大模型可以用于预测聚丙烯发泡体系胀大比。
4.
Study on Melt Density of PP and PS Foaming System
聚丙烯及聚苯乙烯发泡体系熔体密度的研究
5.
Study on Microcellular Foaming of Polypropylene/SBS Elastomer Blending
聚丙烯和弹性体SBS共混物的微孔发泡研究
6.
Preparation of Pre-foamed Particles of Polypropylene Resin by ～(60)Co-γ Irradiation;
～（60）Co-γ辐照制备聚丙烯发泡珠粒
7.
Research on Structural Foaming Injection Molding of Polpropylene (PP)
聚丙烯（PP）结构发泡注射成型的研究
8.
Open-cell foam properties of polypropylene with linear low density polyethylene
添加LLDPE的聚丙烯开孔发泡性能研究
9.
Research on Polymerization of Acrylonitrile Initiated by Cyclopentadienyl Sodium/Toluene System
环戊二烯钠/甲苯体系引发丙烯腈聚合反应研究
10.
Research on the High-Melt-Strength Polypropylene for Foaming Prepared by Reactive Extrusion;
反应挤出法制备发泡用高熔体强度聚丙烯的研究
11.
Investigation on the Preparation of Polyproylene Open-Cell Foam by Supercritical Fluid Technology
超临界流体技术制备聚丙烯开孔发泡材料的研究
12.
Research on Synthesis of Triazine Charring-Foaming Agents and Their Flame Retardant Mechanism in Polypropylene
三嗪系成炭—发泡剂的合成及在聚丙烯中的阻燃机理研究
13.
Experiment Study on Extrusion Swell of PS/SCCO_2 Foaming System;
聚苯乙烯/超临界CO_2发泡体系挤出胀大实验研究
14.
STUDY ON PP/EPDM BLENDS
聚丙烯/三元乙丙橡胶共混体系的研究
15.
Miniemulsion Polymerization of Styrene and Acrylic Monomers;
苯乙烯/丙烯酸系单体的微滴乳液聚合
16.
The Preparation and Performance of Water-Destructible PS/PAANa Blends and Its Application in Foam;
水崩解性聚苯乙烯/聚丙烯酸钠共混物的制备、性能及其发泡研究
17.
Study of Rice Husk/Polypropylene-Low Density Polyethylene Microcellular Foaming Composites
稻壳/聚丙烯—低密度聚乙烯微孔发泡复合材料的研究
18.
Chemical Foaming of EPDM/LDPE Rubber Plastic Polyblend
三元乙丙橡胶/低密度聚乙烯共混物的化学发泡