1.
Study on Three-Dimensional Flow of Coat-Hanger Die for Sheet Extrusion
板材挤出衣架式机头三维流场的研究
2.
Study on Filler Modification of UHMW-PE and Its Force-Lubrication Extrusion by Co-Rotating Twin Screw Extruder;
UHMW-PE填充共混改性及实施双螺杆强制润滑板材挤出的研究
3.
Unplasticized polyvinyl chloride extruded plates
GB/T13520-1992硬质聚氯乙烯挤出板材
4.
Study of the Gas Assisted Extrusion Board for UHMW-PE;
气辅挤出UHMW-PE板材的研究
5.
This production line is applicable to the continuous extruding of PVC door plate, clapboard^ elbow board and floorboard.
该生产线主要用于PVC整体门板、板、体材料及窗台板、板的连续挤出。
6.
full steel cover over the extruder barrel with air venting grid on top.
挤出机机筒盖板为带有通风开口的全钢材质。
7.
Acrylenitrile-butadiene-styrene (ABS) plastics extrusion plates
GB/T10009-1988丙烯腈-丁二烯-苯乙烯(abs)塑料挤出板材
8.
Study on Screw Die for Extrusion of Wide-Thick Rubber Sheet
挤出宽幅厚橡胶板材的螺杆分配机头的研究
9.
Effect of recipe and extruding parameter on the properties of panel ABS material
掺混配方及挤出工艺对板材ABS专用料性能影响
10.
XPS foamed board, has a perfect closed-pore alveolate structure.
◆ XPS挤出聚苯乙烯发泡板材，具有完美的闭孔蜂窝状结构。
11.
polyphenylene oxide molding and extrusion materials
聚苯氧模塑和挤出材料
12.
Technology for avoiding coarse grain in aluminum alloy extrusion plates
挤压铝合金板材避免晶粒粗大的工艺
13.
Study on Modification of UHMWPE and Processing Sheet by Twin Screw Extruder;
对超高分子量聚乙烯改性及实施双螺杆连续挤出板材成型技术的优化研究
14.
Design of the Extruding Die for Compound Triple-Layer Plastic Pipe by Two Extruding Machines
两台挤出机共挤复合三层塑料管材的机头设计
15.
The Design of Twin-Screw Extruder Die for Special-shaped Profile
挤出异型材用双螺杆挤塑机机头模具的设计
16.
Optimization Research on Die Structure for Aluminum Shape Flat-plate Extruding;
铝型材壁板挤压模具结构优化设计研究
17.
Shrinkage of extruded fiber reinforced cement mortar board
挤压成型纤维增强水泥砂浆板材的收缩性能
18.
Defects and its Prevented Measures of As-extruded Magnesium Sheets
镁合金板材挤压缺陷的研究及预防措施