1.
THE WEIGHTED AVERAGE FUNCTIONALITY OF HTPB BINDER AND ITS CORRELATIVITY WITH THE BEST CURING PARAMETER OF SOLID PREPELLANTS
丁羟胶重均官能度及其与推进剂最佳固化参数相关性的研究
2.
Parameter-Optimized and Experiment-Studied in Solid-State Heat Capacity Laser;
固体热容激光器参数优化与实验研究
3.
Optimizing Study on Parameter of Nd: YAG Solid Laser Amplifier
Nd:YAG固体激光放大器的参数优化研究
4.
consolidation parameter
固结参数 -土力学
5.
Impact of Gasification Parameters on Coal Gasification in Fixed Bed with High-Temperature Air
气化参数对固定床煤高温空气气化的影响
6.
The Design of Copying Static Template Used for Spinning Ends and the Optimization of the Facts
封头旋压固定模板结构设计及参数优化
7.
A Parameter Estimation Method of Two-dimensional Model of Fixed Bed Catalytic Reactors
固定床化学反应器二维模型的参数估计方法
8.
Optimization of the Key Parameters of All Solid-state Q-switched Lasers;
全固态调Q激光器关键性能参数的优化
9.
Optimization of Process Parameters on the Semisolid Slurry of Aluminum Alloy A356;
LSPSF法制备半固态A356浆料工艺参数的优化
10.
The Measurement of Basic Flow Parameters in Gas Phase Ethylene Polymerization Fluidized Bed Reactor;
聚乙烯气固流化床的基本流动参数的测定
11.
Complexity Study and Application of Multi-Signals in Gas-Solid Fluidized Beds;
气固流化床多参数信号复杂性的研究和运用
12.
Parameters Variation Mechanism of Solid Electrolytic Tantalum Capacitors in Very High Temperatures
固钽电容在甚高温条件下参数变化机理
13.
CHANGEMENT OF SOLID ROCKET PLUME INFRARED SIGNAL WITH FLY PARAMETERS
固体火箭喷焰红外信号随飞行参数的变化
14.
Experimental Study on Optimization of Technological Parameters and Agglomeration Mechanism of Carbon-containing Pellets
含碳球团生产工艺参数优化及固结机理研究
15.
Nonparametric fitting model for determining soil preconsolidation pressure
确定土体前期固结压力的非参数化拟合模型
16.
Parametric analysis on interface stresses of pre-stressed strengthening RC beams with HFRP
预应力混杂纤维加固RC梁界面应力参数化分析
17.
Optimized design of rockbolts for shallow embedded bias tunnels
浅埋偏压隧道锚杆加固参数的优化研究
18.
Optimization of Supporting Parameters for Treating High Liquid Limit Soil Slope by Soil Nails
土钉加固高液限土路堑边坡的支护参数优化