1.
Structure and Mechanical Properties of Polymer Blends of PA6 and ABS Compatibilized by SMA
SMA增容PA6/ABS共混物的结构和力学性能
2.
Study on Compatibilization of Oxazoline-modified ABS to PA6/ABS Blends
ABS噁唑啉化对PA6/ABS共混物的增容作用研究
3.
Effect of Temperature and Test Speed on Toughness of PA 6/ABS Blends
温度和测试速率对PA6/ABS共混物韧性的影响
4.
THE EFFECT OF SMA,OMMT ON THE MORPHOLOGY AND MECHANICAL PROPERTIES OF PA6/ABS BLENDS
SMA、OMMT对PA6/ABS共混物聚集态结构及性能影响的研究
5.
Study on the Effects of Blending Sequence and Blend Composition on the Morphological, Mechanical Properties of Polymer Blends of PA6 and ABS;
PA6/ABS共混物体系配比及共混工艺对其聚集态结构与性能影响的研究
6.
Effects of Nano-montmorillonite on Morphology and Properties of Polyamide 6 (PA6) and Acrylonitrile-Butadiene-Styrene (ABS) Blends
纳米蒙脱土对PA6和ABS共混体系形态及性能影响的研究
7.
The Influence of SMA Content on Brittle-Ductile Transition Temperature and Morphology of PA6/ABS Blends
SMA含量对PA6/ABS共混体系结构和韧-脆转变温度的影响
8.
Improving compatibility of styrene-butadiene-styrene/polyamide 6 blends by radiation crosslinking of the SBS
SBS辐射交联对SBS/PA6共混物性能的影响
9.
Crystallization Behavior of Miscible PA6 and PA6IcoT Blends
PA6/PA6IcoT相容共混物的结晶行为
10.
Study on Compatibility and Mechanical Properties of PA6/PVA Blend
PA6/PVA共混物的相容性与力学性能研究
11.
Effects of Maleic Anhydrite Grafted Polypropylene on the Compatibility of PP/PA6 Blends
PP-g-MAH对PP/PA6共混物的增容作用
12.
RESEARCH OF RHEOLOGICAL BEHAVIOURS OF IN-SITU COMPATIBILIZED NYLON 6/POE BLENDS
原位增容PA6/POE共混物流变行为的研究
13.
Study of preparation and mechanical properties of the PA 6/SEBS-g-ITA blends
PA6/SEBS-g-ITA共混物的制备及性能研究
14.
Effects of Content of PA6 on the Morphology and Mechanical Properties of PVC/PA6 Blends
PA6含量对PVC/PA6共混物形态结构与力学性能的影响
15.
Toughening Mechanisms of PVC/SAN/ABS Blends
PVC/SAN/ABS共混物的增韧机理
16.
Effect of Epoxy Resin on Properties of PVC/ABS Blend
环氧树脂对PVC/ABS共混物性能的影响
17.
Study on Percolation Threshold Value and Morphology of Co-continuous PS/PA6 Blend;
双连续相PS/PA6共混物临界组分比及相形态研究
18.
Influence of Different Atmospheric Conditons During Repeated Processing on the Property of Plastic;
气体环境和重复加工对PP/PA6共混物性能的影响