1.
Circle flange forming by prefabricated elliptical hole in stainless steel elbow
不锈钢弯管上用预制椭圆孔翻边成形圆孔
2.
Numerical Simulation Research for Hole-flanging Based on DYNAFORM Software
基于DYNAFORM的圆孔翻边数值模拟研究
3.
Research on Formability of Aluminum Alloy Flanged Hole by EMF
基于磁脉冲技术的铝合金板材圆孔翻边工艺研究
4.
quadrant-edge orifice plate
1/4圆周边缘孔板
5.
Numerical simulation and deforming control of concave curvature flanging in automobile panels
汽车覆盖件内凹圆弧翻边仿真与变形控制研究
6.
with sharp-edged perforations for foods (as vegetables or cheese).
有给食物（如蔬菜或奶酪）准备的圆边的孔。
7.
The edge of the curtain was beautifully pinked out.
窗帘的边缘被剪成漂亮的小圆孔做装饰。
8.
Properties of the Hollow Gaussian Beam through a Circular Aperture;
空心高斯光束通过圆孔形硬边光阑的传输特性
9.
Study on Stability of Web with Circle Openings in Cold-Formed Thin-Wall Lipped Channel Beams
冷弯薄壁卷边槽钢梁开圆孔腹板稳定性能研究
10.
the edge of both flaps was rolled up and the posterior flap was turned up into a "hook" or "barrette".
裂孔边缘特别是后瓣多翻卷形成钩状或发夹状。
11.
Exploration of the Two Flange Prefabricated Hole Diameter Calculation Formulas
翻边预制孔直径计算的两个公式的探究
12.
A small hole edged with embroidered stitches as part of a design.
镶边小圆孔用刺绣针法镶边的小洞，作为设计的一部分
13.
The Photoelastic-plastic Analysis of Local Stress Field in the Circular Aperture Edge for the Strain Hardening Material
应变硬化材料圆孔边局部应力场的光弹塑性分析
14.
Numerical simulation on influence coefficient of lateral pressure on broken zone of circular aperture
侧压系数对圆孔周边松动区破坏模式影响的数值试验研究
15.
folded selvedge
卷边,翻边（织疵）
16.
Pin feed: The method of feeding continuous stationery by lining up pins on the machines with a series of small holes in the paper.
圆钉给纸:边续表格的给纸方法。纸的两边打上连串小孔，对齐机器上的钉而被带动。
17.
The boundary line of a circle.
圆周一个圆的边界线
18.
Circumference:The boundary line of a circle.
圆周:一个圆的边界线.