1.
Large Gear Inside the Gear End of the Transformation Hardening Machine CNC
![点击朗读](/dictall/images/read.gif)
大型齿轮内齿圈端面淬火机床的数控化改造
2.
Study on Principle and Technology of On-Machine Measuring Large Gears
![点击朗读](/dictall/images/read.gif)
大型齿轮在机测量原理及技术的研究
3.
Measurement Error Separate and Simulation Studies for Large Gear Based on Rack-shaped-edge Probe
基于刃边齿条形测头的大型齿轮在位测量的误差分离和仿真研究
4.
Study of In-suit Integrated Measuring Theory and Technology for Large Gear;
![点击朗读](/dictall/images/read.gif)
大型齿轮在位综合测量原理与技术的研究
5.
Development of Large Gear In-Suit Measuring System Base on Coordinates Method;
![点击朗读](/dictall/images/read.gif)
基于坐标法的大型齿轮在位检测系统研制
6.
Study on the Tooth Crest Chamfering Model of Bull Gear of Spiral Bevel Gear Pair;
![点击朗读](/dictall/images/read.gif)
弧齿锥齿轮大轮齿顶倒角加工模型研究
7.
main gear wheel
![点击朗读](/dictall/images/read.gif)
主大齿轮行星齿轮中心齿轮
8.
A small cogwheel that engages or is engaged by a larger cogwheel or a rack.
![点击朗读](/dictall/images/read.gif)
小齿轮,齿杆啮合大齿轮或被大齿轮或齿条啮合的小齿轮
9.
The Study on Load Sharing Properties and Optimization of Large Scale Wind Turbine Gearbox
![点击朗读](/dictall/images/read.gif)
大型风电齿轮箱均载性能研究及优化
10.
Quality Control and Heat Treatment of Large ZG42CrMo Cast Steel Gear
![点击朗读](/dictall/images/read.gif)
ZG42CrMo大型铸钢齿轮质量控制与热处理
11.
A unified model was established for spur cylindrical gears, helical cylindrical gears, spur bevel gears and helical bevel gears.
建立了直齿圆柱齿轮、齿圆柱齿轮、齿圆锥齿轮、齿圆锥齿轮的统一模型。
12.
Abstract: This artical presents the principle and equipment for slotting large modulus gear with helical teeth and herringbone gear with narrow slot cutter groove.
文摘:介绍了在大型普通滚齿机上插削大模数斜齿轮和小空刀槽人字齿轮的原理与装置。
13.
large oversized 4 kw ac motor drive, coupled directly to a helical bevel gear, which in turn is connected to an individual housing containing the oversized trust bearing for the screw drive.
大型4千瓦交流电机直接同螺旋型锥齿轮连接。
14.
The large machined main gear and standard15 tooth pinion gear comprise the rotor head drive system on the Synergy N9.
大型机械齿轮、准主要包括1915年牙杯头插齿传动系统的协同N9号.
15.
Calculation on deformation of spur gear teeth based on precise model of teeth profile
![点击朗读](/dictall/images/read.gif)
基于精确齿廓模型的直齿轮轮齿变形数值计算
16.
bevel pinion and bevel gear set
![点击朗读](/dictall/images/read.gif)
主动小锥齿轮和被动大锥齿轮副
17.
This large gear turns the small one to rotate the cylinder.
![点击朗读](/dictall/images/read.gif)
这个大齿轮带动小齿轮使滚筒旋转。
18.
Dynamic Analysis of Mutistage Gear Transmission System of Large Cement Equipment;
![点击朗读](/dictall/images/read.gif)
大型水泥设备多级齿轮传动系统动力学分析