1.
Overlay Welding Crack Testing Based on TOFD
TOFD方法在薄壁堆焊层裂纹类缺陷检测中的应用
2.
CAUSE ANALYSIS OF CRACK ON INNER WALL OF IMPORTED HYDROGENATION REACTOR
进口加氢反应器内壁堆焊层裂纹成因分析
3.
In the paper, mainiy discusses character of crack of high hardness hardfacing layer( HRC62 over), its growing period and adopting technology measure to prevent from producing of crack.
文章主要讨论了高硬度堆焊层裂纹的特征、长时期以及防止裂纹产生的工艺措施。
4.
Analysis of Crack on Overlaying Surface on Hydrogen Heat Exchanger and the Treatment
加氢换热器堆焊试板表层出现裂纹原因分析与处理
5.
Cracking Analysis of Arc Hardfacing Layer of Bainite Steel Frog
贝氏体钢辙叉电弧堆焊层的开裂分析
6.
Analysis on Causes of Peeling and Cracking of Surfacing Welding Layer of Hydrocracking Reactor
加氢裂化反应器堆焊层剥离和开裂原因分析
7.
Effect of Welding Process on Microstructure and Properties of Surfacing Layer with D212 Welding Electrode
D212焊条堆焊工艺对堆焊层组织性能的影响
8.
Inside Weld Crack Analysis and Control of SSAW Pipe
螺旋埋弧焊管内焊缝裂纹分析与控制
9.
The technology requirements and characteristics of overlay of a refractory steel build-up welding wire are introduced.
介绍了一种热强钢堆焊焊条的堆焊工艺要求、焊层特性。
10.
On Influence of Welded Joint on Fracture Parameter with Crack in Different Location
裂纹位置对焊接接头断裂参量的影响
11.
CONTAINING TI AND B HARD--FACING EELECLRDE RESEARCH ANALYSIS FOR THE HARDNESS WEAR-RESISTING ANTI-ARAC PROPERTY
含钛硼堆焊焊条研究——堆焊金属的抗裂、硬度、耐磨性分析
12.
Study on Strip Surfacing Technologies and Mechanical and Property of Surfacing Deposit for 2.25Cr1Mo Steel;
2.25CrlMo钢带极堆焊工艺及堆焊层组织、性能研究
13.
Study on the Overlaying Property and Hot Corrosion Resistance of Fe_3Al Alloy Overlayer;
Fe_3Al合金堆焊及堆焊层的耐热腐蚀性能研究
14.
Research on Corrosion Resistance of Overlaying Welding Layer Using A102,A132 and A302 Stainless Steel Electrode
A102、A132和A302焊条堆焊层耐蚀性研究
15.
The Influence of Carbon Content on the Hardness and Microstructure of Layer on Weld Deposit Rob with Multi-elements Alloying System
碳含量对多元合金系堆焊焊条堆焊层硬度的影响
16.
The formation of cracks on the surface of paint layers.
油画层皱裂油画表层裂纹的形成
17.
A New Method of Controling Welding Hot Cracking by Welding Based on Electromagnetic Forces;
基于电磁力的焊接热裂纹随焊控制新方法
18.
Cause Analysis and Prevention Measure of Terminal Crack of Submerge-arc Welding Longtitudinal Weld
埋弧焊纵焊缝终端裂纹原因分析及预防措施