1.
Appraisal of Faw-Ford Brazed Aluminum Radiator Project;
一汽-福特铝钎焊散热器项目后评价
2.
EXPERIMENTAL INVESTIGATION ON CONDENSATION PERFORMANCE OF BRAZED TYPE PARALLEL FLOW CONDENSERS
全铝钎焊式平行流冷凝器性能对比实验
3.
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
4.
The Study of Low-Melting-Point Filler Metal for Al-Si-Mg Series Alloys Vacuum Brazing;
Al-Si-Mg系锻铝合金真空钎焊低熔点钎料的研究
5.
Development of Brazing Grease for Stainless Steel-Aluminum in High Frequency Induction Brazing;
不锈钢—铝高频感应钎焊膏状钎料的研制
6.
Vacuum Brazing Aluminum Matrix Composites with Low Melting Point Solder Development
真空钎焊用低熔点铝基复合钎料的研制
7.
Influence of Cu on Properties of Zn-Al Solders for Al/Cu Brazing
Cu元素对铝/铜钎焊用Zn-Al钎料性能的影响
8.
Study on Brazing Technology for LY12 Aluminum Alloy at Middle-range Temperature;
LY12铝合金中温钎焊技术的研究
9.
Characteristics Study on Laser Welding-Brazing of Aluminum/Titanium Dissimilar Materials;
铝/钛异种材料激光熔钎焊特性研究
10.
Investigation on Brazing Process of Muti-Clad Aluminum Alloy FA7827;
FA7827铝合金多层复合板钎焊工艺研究
11.
Corrosion resistance of intermediate temperature filler metal for stepped welding to 6063 aluminum alloy
6063铝合金阶梯焊中温钎料腐蚀性能
12.
Research on Change Rule of Cladding Rate of Hot-rolled Aluminum Matrix Brazing Sheet
热轧铝基钎焊板包覆率变化规律研究
13.
Brazability of SiC Particulate Reinforced Aluminium Metal Matrix Composites
SiC颗粒增强铝基复合材料的钎焊性
14.
Microstructure and Properties of Vacuum Brazing C_f/C Composites Using Reactive Al Based Filler Metals
铝基活性钎料真空钎焊C_f/C复合材料焊接接头的组织及性能
15.
Improvement of joint brazability of aluminum alloys to stainless steel in the air
铝合金与不锈钢大气钎焊性的改善——铝合金与不锈钢焊接技术(二)
16.
Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能
17.
Technology of Ultrasonic Brazing of Aluminum by Sn-Zn Solders and Strengthening Mechanism of Joint
Sn-Zn钎料超声钎焊铝合金工艺及接头强化机制研究
18.
Duality of Influence of Flux on Brazing Property Between Aluminum Alloys and Stainless Steel in Air
钎剂对铝合金与不锈钢大气钎焊性影响的二重性