1.
Research on Three-mode Overlapped Two-gap Coupled Cavity Type Output Circuit;
三模重叠双间隙耦合腔型输出回路的研究
2.
Calculation and Simulation of the Electronic Conductance in Double Gap Coupling MBK Cavity
多注双间隙耦合腔电子电导计算与模拟
3.
Output Circuit of π-TM_(610) Mode Double-Gap Coaxial Cavity Coupled with Coaxial Line
π-TM_(610)模同轴双间隙腔耦合同轴线输出电路
4.
Research on π Mode Coupling Double-gap Rectangular TM_(310) Cavity Coaxial Line Output Circuit;
π模耦合双间隙矩形TM_（310）腔同轴线输出回路研究
5.
Gap Impedance Simulation of X-Band Three-Gap Coupled Cavity Output Circuit
X波段三间隙耦合腔型输出回路间隙阻抗的模拟计算
6.
Study of TM High Mode Double Gap Cavity for Multi-beam Klystron;
适合于多注速调管的TM高次模双间隙腔的研究
7.
In this paper a microstrip disp disk cavities bandpass filter using gap capacitances coupling is proposed and tested.
本文提出一种间隙电容耦合的微带圆盘腔带通滤波器。
8.
A Novel Slot-coupled Bual-band RFID Tag Antenna
一种新型缝隙耦合双频RFID标签天线
9.
Fully Coupled Numerical Simulation of Fractured Porous Media with Elasto-Brittle-Plastic Deformation;
弹脆塑性双重孔隙介质油藏流固耦合数值模拟
10.
Broadband Dual Linear Polarization H-shaped Apertures-coupled Microstrip Antenna
基于H形缝隙耦合的宽带双极化微带天线
11.
Analysis on high power microwave aperture coupling of double layer shielding enclosure
高功率微波对双层屏蔽腔体的孔缝耦合特性
12.
Research on 3D Molding and Meshing Clearance of Conical Twin-Screw
锥双螺杆的三维建模与啮合间隙研究
13.
Preventative diagnosis and treatment of the serious burn injury with abdominal compartment syndrome
重度烧伤并发腹腔间隙综合征的诊断和治疗
14.
The peritoneal cavity is a potential space.
腹腔是一个潜在的间隙。
15.
Intermodal Interference in Microstructure Fibers and Mode Coupling between Cavities;
微结构光纤中的模间干涉及光腔的模式耦合
16.
Coupled hydro-mechanical model and FEM analyses for dual-porosity media considering geometric-mechanical characteristics of fractures
考虑裂隙的几何-力学特性的双重孔隙介质水-应力耦合模型及其有限元分析
17.
COUPLED THERMO-HYDRO-MECHANICAL MODEL AND FINITE ELEMENT ANALYSES OF DUAL-POROSITY FRACTURED MEDIUM FOR UBIQUITOUS-JOINT ROCK MASS
遍有节理岩体的双重孔隙-裂隙介质热-水-应力耦合模型及有限元分析
18.
Dynamic Response of Geared Rotor System and the Effect of Clearance on Jump Characteristics of Amplitude
齿轮—转子耦合系统的动态响应及齿侧间隙对振幅跳跃特性的影响