1.
Fracture Analysis for Torsion Problem of Isotropic or Anisotropic Bar with Curvilinear Cracks;
各向同性和各向异性材料带曲线裂纹柱体的扭转断裂分析
2.
A Modeling Method for Crack Growth Curve
裂纹扩展曲线建模方法及其影响研究
3.
The smaller the curvature and the larger the crack length the smaller will be the fracture stress.
曲线半径越小，裂纹长度越大，断裂应力也就越低。
4.
The problem of an elastic plane having symmetric parabolic crack is discussed.
研究含轴对称抛物线曲裂纹平面弹性问题.
5.
Research of Magnetic Memory On-line Detect on the Crack of Marine Diesel Engine Crankshaft;
船舶柴油机曲轴裂纹故障磁记忆在线诊断技术研究
6.
The influence of specimen's thickness on JR curves, the curve of driving force for crack growth and the method of its determination are also discussed.
研究了J_R曲线受试样厚度的影响。 还介绍了弹塑性裂纹扩展推力曲线及其确定方法。
7.
double generator of a ruled surface
直纹曲面的二重母线
8.
Resarch on crack preventing on-line in 40GrNiMo specimen with edge crack and its microstructure analysis
40GrNiMo试件单边裂纹在线止裂及组织分析
9.
yield mass curve
裂变产额 质量曲线
10.
The existence of residual stress and brace plate in a fillet welded joint has obvious effects on CADC and fatigue life.
残余应力及角接接头中支板的存在对裂纹形态发展曲线和疲劳寿命有明显的影响
11.
The analysis of cracking in steel bridges can usually be accomplished by using linearelastic fracture mechanics.
通常可用线弹性断裂力学进行钢桥裂纹分析。
12.
Research on Creep Crack Growth of Nonlinear Viscoelastic Body;
非线性粘弹性体裂纹扩展速度的研究
13.
CAUSE ANALYSIS OF THE CRACK ON THE FLANGE FOR MEDIUM TEMPERATURE SHIFT COOLING SYSTEM
中变空冷入口管线法兰裂纹原因分析
14.
Research on Reinforcement of Nozzle with Penetrated Crack at Intersecting Line
相贯线处含穿透裂纹接管的补强研究
15.
Fatigue life prediction of crack-like flaws in oil gas pipeline
油气管线裂纹型缺陷的疲劳寿命预测
16.
Welding Thermal Crack Simulation Study on X70 Grade Pipeline Steel
X70级管线钢焊接热裂纹模拟研究
17.
Near Crack Line Plastoehstic Andysis of mode ⅢEdge Cracked Plates LoadedbyPoint Forces
Ⅲ型边裂纹受一对集中力时裂纹线场的弹塑性分析
18.
Calculation of Stress Strength Factors at Crack Tip of= Fraxinus mandshurica Rupr. by Finite Element
用有限元计算水曲柳裂纹尖端应力强度因子