1.
Modified Dugdale Mode in View of Couple Effect on K_Ⅰ and K_Ⅱ at Crack Tip Under Biaxial Tension
双轴载荷下反映裂尖K_Ⅰ和K_Ⅱ耦合作用的修正Dugdale模型
2.
The Dynamic Load Distribution and the Estimated Fatigue Life of the Axles on Double Deck Passenger Cars
双客车轴动载荷分布与疲劳寿命估算
3.
Extended Rankine Approach for Bi-Axial Loading Steel Columns Under Natural Fire
火荷载下双轴受荷钢柱的拓展兰金方法
4.
Finite element simulation of PVC coated biaxial warp knitted fabric under biaxial loads
双向载荷下PVC涂层双轴向经编织物有限元分析
5.
Finite element analysis of PVC coated biaxial warp knitted fabric under multiaxial loads
多向载荷下PVC双轴向经编织物有限元分析
6.
Precracked tearing properties of PVC/ biaxial warp knitted fabric under multiaxial loads
多向载荷下PVC/双轴向经编织物的开缝撕裂性能
7.
Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings.
四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。
8.
Four row circular cone roller bearings its performance and double row circular cone roller bearings basic same, but may withstand the bigger radial direction load and the two axle to the load.
四列圆锥滚子轴承其性能与双列圆锥滚子轴承基本相同，但可承受更大的径向载荷和双轴向载荷。
9.
Twin-Characteristic-Parameters Method for Dynamic Buckling Analysis of Cylindrical Shells under Transient Step Load
轴向瞬间阶梯载荷下圆柱壳动力屈曲的双特征参数分析
10.
Load analysis of cylindrical roller bearing with inclined axis
圆柱滚子轴承轴线倾斜时的载荷分析
11.
Precracked tearing properties of flexible composites reinforced with biaxial warp knitted fabric under biaxial loads
双向拉伸载荷下双轴向经编织物增强柔性复合材料开缝撕裂性能研究
12.
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
深沟球轴承主要承受径向载荷，也可承受一定量的轴向载荷。
13.
Stress distribution in zygapophyseal joint following two level artificial disc replacement under axial loading
轴向载荷对双节段颈椎人工椎间盘置换邻下位关节突关节压力的影响
14.
DETERMINING OF THE FOURK-SIDES NON-FIXED RECTANGLE PLATE'S EQUIVALENT UNIFORM DISTRUBUTED LOAD IN THE CONCENTRATED LOADS
集中荷载作用下双向板等效荷载的确定
15.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
16.
Study on Load Analysis Method for Diesel Engine Crankshaft Main Bearing Based on ADAMS;
基于ADMAS的柴油机曲轴主轴承载荷分析方法研究
17.
Equivalent factors of multi-axle loads for asphalt surfacing on steel bridge decks
钢桥面铺装多联轴荷载的当量轴数研究
18.
How do engineering materials deform when bearing mechanical loads?
如何做工程材料变形时，轴承机械载荷？