1.
THE FINITE STRAIN ANALYSIS OF THE STRETCHING GRAVEL AND OOIDE OF DUCTILE NAPPE SHEAR ZONE IN SOUTHERN LIAONING
辽东半岛南部韧性推覆剪切带拉伸砾石、拉伸鲕粒的有限应变分析
2.
Accordingly, it is important for us to improve the utilizationof the stress shearing technique.
因此，应力法剪切技术的推广相当重要。
3.
Study of shear experiment of solid propellant with alterable directions
固体推进剂的变角剪切力学试验研究
4.
The result of this shearing force is to push the endoplasm forward.
这种剪切力作用的结果是推动内质向前。
5.
Estimation of the Deformation-Modulus in Sandy Soils by the Shear-Modulus of pressuremeter Test
用旁压剪切模量推算砂性土地基的变形模量
6.
Research on the Anti-shearing Charactisties on the Parking Section Asphalt Pavement of Bus Rapid Transit
BRT停车段沥青路面抗剪切推移特性研究
7.
Research on Rapid Propulsion Derice for Energy Absorbtion System With Cutting Screw Thread duning Collision
螺纹剪切式碰撞吸能系统快速推进装置研究
8.
Similar Simulation Verification of Shearing Slip Model of Overlying Composite Stratum in Stope
采场上覆复合岩层剪切滑移模型的相似模拟验证
9.
rotary gang slitting
带材多刀圆盘剪纵剪切
10.
One that cuts, shears, or clips.
修剪工切、剪或削的人
11.
Skipping an irregular paint application, usually occurring when improper contact is made between the applicator roll and the strip. See also starving out.
剪切—剪切还发生在辊与辊接触点。剪切通常还指金属剪切设备。
12.
"Hydraulic shear-dual, dia set, resquaring shear set-down out type. "
液压剪,双刃剪,冲模,正方切剪设定
13.
The Relationship between the Average Shear Angle in Vibration Cutting and the Shear Angle in Conventional Cutting
振动切削平均剪切角和普通切削剪切角的关系
14.
Construction on the optimization designing system of shearing mechanism of rolling shear
滚切剪剪切机构优化设计系统的构建
15.
Calculate method of shear force is discussed on difficult obliquity in this paper.A calendar method to shear force of slanting knife-edge is put forward.
斜刃剪切时刃倾角取不同值时剪切力的计算方法不同，推导出相应的计算公式并限定了适用范围。
16.
The detection and reconstruction of wavefront by Lateral Shear Interferometer (LSI) and Hartmann Wavefront Sensor (HWS) have been deduced analogically and simulated numerically.
对横向剪切干涉仪和哈特曼波前传感器的波前探测和复原进行了类比推导和仿真计算。
17.
Cuts the selection and puts it on the Clipboard
剪切所选内容并将其放入剪贴板。
18.
Perfect the Auxiliary Equipment of Disc Type Shear and Improve Shearing Quality
完善圆盘剪辅助设施,提高剪切质量