1.
Numerical Simulation of Interface Round Hole by Trasient P-wave Scatter;
界面圆孔对瞬态P波散射的数值模拟
2.
On the Scattering of SH-Wave by Multiple Circular Cavities Near the Interface;
界面附近相邻多个圆形孔洞对SH波的散射
3.
SCATTERING OF SH-WAVE BY INTERFACE CRACK AND NEIGHBOURING CIRCULAR CAVITY IN BI-MATERIAL VERTICAL HALF-SPACE
垂直半空间界面裂纹及附近圆孔对SH波的散射
4.
Dynamic Anti-plane Behaviors of an Semi-infinite Piezoelectric Medium with an Circular Cavity and an Crack Near the Surface;
半无限压电材料界面附近圆孔与裂纹的动力反平面特性
5.
Scattering of SH-Wave and Dynamic Stress Concentration on a Piezoelectric Medium with a Cavity Near the Interface;
压电材料中界面附近圆孔对SH波的散射及动应力集中
6.
Dynamic analysis for scattering of SH-wave by circular cavities near bimaterial interfaces in a vertical half-space
SH波入射时垂直半空间中双相介质界面附近圆孔的动力分析
7.
Round nuts with drilled holes in one face
GB/T815-1988端面带孔圆螺母
8.
Round nuts with set pin holes in side
GB/T816-1988侧面带孔圆螺母
9.
Analytical Model for Cross-Sectional Area of Workpiece in Round-Oval-Round Pass Sequence in Bar Rolling
棒材轧制圆-椭圆-圆孔型中轧件面积计算模型
10.
APPLICATION OF CYLINDRICAL CAVITY EXPANSION THEORY TO SOLVE THE CRITICAL DEPTH OF PRESSUREMETER TEST
圆孔扩张理论求解旁压试验临界深度
11.
A circular opening in an opaque screen transmits only a small circular patch of a wave surface.
不透明屏上一个圆孔仅仅透射波面的一小圆块。
12.
Slotted capstan screws
GB/T832-1988开槽带孔球面圆柱头螺钉
13.
chuck for grinding hole and end face of bevel gear
磨圆锥齿轮孔和端面用的卡盘
14.
It has rounded shoulders inside instead of the sharp orifice-like edge.
在内部作成圆形凸肩以代替锐缘孔板状的侧面。
15.
Dynamic Anti-plane Behaviors of an Infinite Piezoelectric Medium with Multi-circular Cavities;
含多个圆孔压电介质的动力反平面行为
16.
Dynamic Anti-Plane Behaviors of a Semi-infinite Piezoelectric Medium with Circular Cavities;
含多个圆孔半无限压电介质的动力反平面特性
17.
Experimental Study and Analysis of Stress Measurement of Circular Steel Tubes by Using Blind-Hole Method
盲孔法测量圆钢管表面应力的试验与分析
18.
Critical Speed of Circumference Movements in Vertical Planes;
竖直平面内圆周运动的临界速度问题