1.
Design of Center Distance Measuring Tool for the Component with Big Size and High Accuracy
高精度大尺寸机件的中心距测量检具设计
2.
Analysis of the Precision Measure Method for the Bearing Seat Hole Center Distance in the Gear Box
齿轮箱轴承座孔的中心距测量方法精度分析
3.
Measurements of the Eccentricities of the Attracting Masses and the Susceptibilities in the Determining G;
周期法测G实验中吸引质量的偏心距与磁化率的测量
4.
The On-line Measurement of the Traveling Wave Velocity in Fault Location System;
行波测距中测距波速的实时测量方法研究
5.
Comparison between API Thread Stand-off Measurement and Middle Diameter Measurement
API螺纹紧密距测量和中径测量的比较
6.
distance from midship to center of floatation
浮心距船中距离漂心距船中距离
7.
Accurate Analysis of General Stadia Survey in Theodolite Surveying and Mapping
经纬仪测图中普通视距测量精度分析
8.
Vector miss distance measurement based on range and velocity target tracking
距离速度跟踪在矢量脱靶量测量中的应用
9.
Distance between left atrial appendage and pulmonary vein in MSCT
多层螺旋CT成像下左心耳与肺静脉距离的测量
10.
distance from midship to center of buoyancy
浮心到船中距离浮心距中距离
11.
Implementation of Objective Measurement with Interval Scale in Psychology Measurement into PISA China Trial;
Rash客观等距测量在PISA中国试测研究中的实践
12.
Reasonable Accuracy of Angular Measure and Linear Measure in Electro-optical Distance Traverses;
光电测距导线中测角和量边的合理精度
13.
New Method for Measuring Time-of-Flight in Pulse Laser Ranging
脉冲激光测距中时间间隔的新的测量方法
14.
High precision time interval measurement in pulsed laser ranging
脉冲激光测距中高精度时间间隔的测量
15.
Using either the dimension print or by measuring the distance between the center lines of the holes on one leg transcribe these dimensions onto floor/Base plate.
利用每个尺寸图或测量每个支柱上中心线之间的距离,将其抄写在地面/底板上。
16.
EDM-height traversing
电子测距高程导线测量
17.
Leaf spring CD( front/rear)
中心距前/后(mm)
18.
Measuring the focal lengths of thin lens by means of object distance and image distance is a commonly utilized method in geometric optics.
利用物距、像距法测量薄透镜的焦度是几何光学中最常用的方法。