说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 深冲钢带
1.
Structure and Performance of the Drawn Ni-coating Steel Strip Surface and Interface Section;
覆镍深冲钢带表界面结构和相关性能
2.
Residual Stress in the Drawn Steel Strip with Electrodeposited Nickel Coating and Effect of Laser Thermal Shock;
覆镍深冲钢带的残余应力及激光热冲击的影响
3.
Cold rolled sheets and strips for deep drawing
GB/T5213-1985深冲压用冷轧薄钢板和钢带
4.
Development and Applications of MDZ3 Deep-drawing Hot Dip Galvanized Steel in BX STEEL
特深冲用热镀锌钢带MDZ3的开发及应用
5.
Effect of Annealing Process on Microstructure and Mechanical Properties of Deep Drawing Cold Rolled Strip
退火工艺对深冲用冷轧带钢组织性能的影响
6.
Pilot Production of Hot Rolling in Ferrite Region for Cold Rolled Extra-low Carbon Steel Strip for Deep Drawing
深冲用超低碳冷轧带钢铁素体区热轧的现场试验
7.
STUDIES ON THE DEEP-DRAWING PERFORMANCE OF STAINLESS STEEL/ALUMINIUM/STAINLESS STEEL (SS/Al/SS) COMPOSITES
耐深冲不锈钢/铝/不锈钢复合材料研究
8.
TECHNOLOGY AND DEVELOPMENT PROSPECT OF DAVEX-H SHAPED STEEL OF DEEP PROCESSING OF STEEL STRIP
带钢深加工DAVEX-H型钢工艺技术
9.
Research on Formability and Damage Mechanism of Deep-drawing Sheet Metal;
汽车深冲薄钢板冲压成形及损伤机理研究
10.
MICROSTRUCTURE AND FORMABILITY OF LOW CARBON PHOSPHORUS-ADD DEEP DRAWING STEEL SHEET
含磷低碳深冲钢的微观结构与成型性
11.
Research and Development of Extra-Deep Drawing DC06
汽车用超深冲钢DC06的研制开发
12.
Development and Production of Aluminium Killed Steel DC04 for Deep Drawing
深冲用铝镇静钢DC04的开发与生产
13.
Hinge leaves are blanked out of strip steel.
铰链叶片是带钢冲压出来的。
14.
Application of standard steel ball in measuring depth of sealing tape
标准钢球在密封带深度测量中的应用
15.
The structure and texture of continuous or batch annealing deep drawing and extra-deep drawing steel sheets were observed and analyzed.
对连续退火或罩式退火后的深冲钢板和超深冲钢板的组织以及织构进行了观测和分析。
16.
ON-LINE r VALUE MEASUREMENT OF DEEP- DRAWING SHEET METAL WITH ELECTROMAGNETIC ACOUSTIC TRANSDUCER
电磁超声换能器法在线检测深冲钢板?值
17.
Recrystallization and formation of {111} texture in micro-carbon deep drawing steel sheet
微碳深冲钢板的再结晶与{111}织构的形成过程
18.
Effect of ferritic region hot-rolling on deep draw ability of Ti-IF steel
铁素体区热轧工艺对Ti-IF钢深冲性能的影响