说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 自动闭门器
1.
door closer, automatic, of base metal
自动闭门器,贱金属制
2.
door closer, of base metal (excl. automatic), for doors of buildings
闭门器,贱金属制(不包括自动的),用于建筑物门
3.
Auto Shutdown Rly Ctrl
自动关闭继电器控制
4.
He made a device to make the door shut by itself.
他做了一个使门自动关闭的装置。
5.
Are toilet room doors self-closing, and do not open to processing areas?
厕所门是否自动关闭?其门不能朝向车间。
6.
Check the floppy drive to make sure the door is closed and it contains the correct disk.
检查软盘驱动器,以确定驱动器门已经关闭且装有正确的磁盘。
7.
Make sure a diskette is inserted into the drive and the door is closed.
查明软盘是否已插入驱动器,驱动器门是否被关闭。
8.
The door, which was fitted with a Yale automatic closing device, closed slowly and lightly behind him;
装着耶耳厂自动关闭机的那扇门就轻轻地自己关上;
9.
The Design of Automatic Builder of the Rule Storeroom of Microcomputer Mis-operation in Substation
变电站微机五防闭锁规则库自动生成器的设计
10.
Electric Field Micro-sensor with a Closed-loop Autonomous Driving Circuit
一种闭环自激式驱动的硅微机械电场传感器
11.
The automatic switch has light function (delay time for three minutes):The light is opened automatically while opening the door,shut off the door taillight to go out automatically.
动开关照明灯功能(延时三分钟):开门时灯自动打开,关闭门后灯自动熄灭.
12.
Analysis of Mechanical Block System for Combined Vacuum Electromagnetic Starter with Multiple Quick Open-door
多个快开门组合真空电磁起动器机械闭锁装置的分析
13.
We set the thermostat to shut off the heat when the room temperature reaches 72 degrees.
我们安置了自动调温器,当室温达到七十二度,就会自动停闭暖气。
14.
a choke that automatically controls the flow of air to the carburetor.
自动控制空气流入汽化器的阻气门。
15.
A device that periodically and automatically opens and closes an electric circuit, producing pulses.
断续器一种阶段性的能自动打开及关闭电路并产生脉冲的仪器
16.
No tape was found in your tape drive. Please insert a blank tape (and close your tape drive door if necessary).
在磁带驱动器中没有找到磁带。请插入空白磁带(如有必要,关闭磁带驱动器门)。
17.
automatic top and bottom bolt
门顶门底的自动门闩
18.
Automatic closing of the machine after expiry of the evacuating time with way-dependent switching over from fast closing to pressing speed.
在抽真空时间终止之后,机器自动闭合,位置关系从快闭合切换到压合速度。