1.
The Study of Pulse Electroplating of Au-Sn Bumps
脉冲电镀法制备Au-Sn凸点的研究
2.
Study on Process and Properties of Ni-W Alloy Coatings Produced by Pulse Plating;
脉冲电镀Ni-W合金镀层及其性能研究
3.
Silver recovery and cyanide removal from silver-plating wastewater using pulse-electrolysis
脉冲电源电解处理含氰含银电镀废水
4.
Study on the Ni/nano-SiC Composite Coating Made by Fast Frequency Pulse Electroplating;
高频脉冲电镀镍基纳米SiC复合镀层的研究
5.
Corrosion Behavior of High-frequency Pulse-deposited Nano-crystalline Ni Coating;
高频脉冲电镀纳米晶镍镀层腐蚀行为研究
6.
The Pulse Electronics Brush Plates the Repair Rolling Mill Tooth Wheel Axle to Brush Plates the Craft Practice
脉冲电刷镀修复轧机齿轮轴刷镀工艺实践
7.
Preparation of Ni-Mo Alloy Coating by Pulse Plating and Its HER Activity
脉冲电镀制备Ni-Mo合金镀层及其析氢性能
8.
Study of CrAlN Film Deposited by Pulsed Bias Arc Ion Plating;
脉冲偏压电弧离子镀CrAlN薄膜性能研究
9.
Fundamentals of Pulsed Bias Arc Ion Plating;
脉冲偏压电弧离子镀的工艺基础研究
10.
Factors Affecting the Deposition Rate of Poised Electro-Brush Plated Nickel Coating
脉冲电刷镀镍中沉积速度的影响因素
11.
Pure nickel deposits were obtained from the traditional Watt nickel plating bath by pulse electroplating .
采用传统的瓦特镀液通过脉冲电镀制得纯镍镀层。
12.
The Highly Effective Double-Sided Pulse Plating Current Supply s Research and Realizes;
高效双向脉冲电镀电流源的研究与实现
13.
Dielectric Films of TiO_2 and AlN by Pulsed Bias Arc Ion Plating;
脉冲偏压电弧离子镀沉积TiO_2与AlN介电薄膜
14.
Experimental study on treating electroplating wastewater containing Cr~(6+) with pulse-electro-coagulation
脉冲电絮凝处理电镀含铬废水的实验研究
15.
Effects of process parameters on the textures of tungsten coatings electrodeposited from Na_2WO_4-WO_3-ZnO molten salts
双向脉冲电镀工艺参数对Na_2WO_4-ZnO-WO_3熔盐镀钨层织构的影响
16.
Superhard Multilayer Films Prepared by Pulsed Bias Arc Ion Plating;
脉冲偏压电弧离子镀沉积超硬多层薄膜
17.
Investigations of Anti-corrosion Property of Nanocrystalline Nickel Coating Synthesized by Pulse-jet Electrodeposition;
脉冲喷射电沉积纳米晶镍镀层耐腐蚀性能研究
18.
Preparation and Characterization of Nanometer Hard Films by PBAIP;
脉冲偏压电弧离子镀纳米硬膜的制备与表征