说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 轧制成形
1.
Fem Simulation and Experimental Study of Ring Rolling Process
环件轧制成形工艺的有限元模拟与实验研究
2.
Investigation on Microstructures and Mechanical Properties of ME10 Magnesium Alloy Sheet with Extrusion-Rolling Process;
ME10镁合金板材挤压—轧制成形工艺及组织性能研究
3.
Study on Microstructure and Mechanical Properties of Roll Forming Profiled Stainless Steel Wires Used for Metal Rubber
金属橡胶用异型不锈钢微丝轧制成形对组织性能的影响规律研究
4.
Improvement of Rolling Profile Shape of R0 Roughing Mill with Permanent Rigidity Rolling
恒刚度轧制改善R0粗轧机的轧制板形
5.
The main processes of workin metals into shapes are rolling, forging, and drawing.
把金属加工成形的方法主要有轧制、锻造和拉拔。
6.
To flatten, stretch, or mold(metal) by hammering or die stamping.
轧制通过捶打或印模而使金属展平、延伸或成形
7.
Constitution and Function Analysis of Sheet Shape Control System for 1450 mm Continuous Cold Rolling Production Line
1450mm冷连轧生产线板形控制系统组成和功能分析
8.
Analysis the Causes of Scale on Hot Rolled Strips & Its Prevention Measures
热轧卷氧化铁皮形成原因分析及控制措施
9.
Based on the reduced scale ring rolling and finite element simulation, materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
10.
Shape Controlling of Sheared Strip Head after Bright Roll in Cold Tandem Mill
冷连轧机光辊轧制剪切后头部板形控制
11.
Profile and flatness control technology for schedule-free rolling in hot wide strip mills
宽带钢热连轧机自由规程轧制的板形控制技术
12.
rolled glass, cut to non-rectangular shape or further worked than merely surface ground or polished
轧制玻璃,切割成矩形或经除表面研磨或抛光以外的进一点加工
13.
Research on the Theories of Taper-rolling Process of Endless Spirals and FEA Simulation;
连续螺旋叶片锥辊异面轧制过程的有限元模拟与成形规律研究
14.
Research on Numerical Simulation of Rolling Process of Solid Steel V-belt Pulley;
实心钢制三角皮带轮辊轧成形工艺有限元模拟研究
15.
Virtual Design of Rolling Preform and Stamping-extrusion and Bulge-extrusion Combining Precise Forming for Spur Gear;
圆柱直齿轮滚轧制坯—镦挤、胀挤复合精成形的虚拟设计
16.
Analysis of Causes of Scale Mark Formation on the Surface of Hot Rolled Thin Strip
热轧薄板表面氧化铁皮类缺陷的形成机理与控制
17.
Coilbox can make coil in tandem opration with rougher and also while uncoil the strip is being in finish mill.
生产过程中热卷箱需要与粗轧机形成连轧连卷,又要与精轧机形成连开连轧的工况。
18.
⑤roll deformation is increasing linearly when rolling force is increasing. If the rolling force is equal, the roll deformation is invariant.
⑤随着轧制力增加 ,轧辊变形量线性增加·只要轧制力相等 ,轧辊变形基本不变