1.
Analysis of Kinematical and Error on Rotational Cutting of Radial Slots
径向槽回转切削运动学及加工误差分析
2.
A Study on Vibration Behavior and Thermal Deflection of Circular Saws with Slots;
径向槽对木工圆锯片振动特性和热变形的影响研究
3.
The Analysis of the Performance of Water-lubricated Journal Bearing with Water Grooves in the Axial Direction Based on MATLAB
基于MATLAB的轴向开槽水润滑径向轴承性能分析
4.
Numerical Analysis of Fluid-Structure Interaction in Ignition Process for Solid Rocket Motor with Radial Wing Slot
带径向翼槽SRM点火瞬间流固耦合数值分析
5.
Noise Analysis of Radial Plunger Pump Distribution and Simulation of Distribution Slot
径向柱塞泵配流噪声分析与配流槽仿真研究
6.
An Analysis of Mechanical Property of Elastic Pressure Groove on Air Radial Bearing
气体径向轴承弹性均压槽力学性能分析
7.
However, their cogging torque or unbalanced radial force is usually high, deteriorating the machine performance.
但是这种电机的齿槽定位转矩或不对称径向力一般也比较高。
8.
The Design of Journal Groove Sliding Bearing Test Stand s Simulation Software;
具有油槽的径向滑动轴承实验台仿真软件的研制
9.
Analysis of the Dynamic Performance and the Stability of Liquid-lubricated Herringbone Grooved Journal Bearing (HGJB) with Micro-polar Lubricants;
螺旋槽微极性液体润滑径向轴承动力特性与稳定性分析
10.
Accurate control of compression through close tolerances of gasket groove and allowance for radial expansion.
通过密封环槽的精密公差和径向膨胀的修正来进行压缩的精确调整控制。
11.
Tangential keys and keyways
GB/T1974-1980切向键及其键槽
12.
omniguide antenna
全向辐射槽缝式天线
13.
Fill the pump reservoir with flui
向泵贮油槽中加注油。
14.
Notch- An indent on the edge of a wafer used for orientation purposes.
凹槽-晶圆片边缘上用于晶向定位的小凹槽。
15.
Effect of Particle Size on Avalanche in the Chute;
颗粒直径大小对凹槽颗粒崩塌的影响
16.
alongshore,during the flood tide the suspended sediment concertration in the south channel is greater than that in the north channel while during the ebb tide it in the north channel is greater than that in the south channel.
在横向上表现出涨潮期南槽悬沙浓度大于北槽、落潮期北槽悬沙浓度大于南槽的特性。
17.
full diameter radial permeameter
大直径径向渗透率仪
18.
"Notched Upper Right-Shadowed White Rightwards Arrow
"带开槽随以右上阴影空心向右箭头