1.
sheet-annealing base
薄钢板退火用固定式炉底
2.
Annealing texture of CSP low carbon steel sheet under different cold rolling reduction ratio
CSP工艺不同冷轧压下率低碳钢板退火织构的演变
3.
coffin annealing
(钢板的) 装箱退火
4.
Research of Batch Annealing Process for Cold Rolled Adding P High Strength IF Steel Plate
加磷高强IF钢冷轧板罩式退火工艺研究
5.
Design Characteristics of Continuous Annealing Line for Cold-rolled Steel Sheet of Maanshan Iron & Steel Co.,Ltd
马钢2130mm冷轧薄板连续退火线设计特点
6.
The structure and texture of continuous or batch annealing deep drawing and extra-deep drawing steel sheets were observed and analyzed.
对连续退火或罩式退火后的深冲钢板和超深冲钢板的组织以及织构进行了观测和分析。
7.
Texture Evolution during Annealing in Warm Rolled and Cold Rolled Ti-IF Steel
冷轧后退火过程中温轧Ti-IF钢板织构的演变
8.
The Effect of Annealing Temperature on the Properties and Second-Phase Particles of 0.4 mm Galvanized Ti-IF Steel
退火温度对0.4mm热镀锌Ti-IF钢板组织和性能的影响
9.
FEA Research on Cold Rolled Annealing Steel Plate Stamping Process for Automobile B-pillar
冷轧退火钢板冲压汽车B柱的有限元分析
10.
Effect of Nb Content on Texture After Annealing at 550 ℃ in Cold-roll Strip of Grain-oriented Electrical Steel
铌对取向电工钢冷轧板550℃退火织构的影响
11.
Effects of Annealing Processes on Mechanical Properties for Ultra-low Carbon Cold Rolled Sheets
退火工艺对超低碳钢冷轧薄板力学性能的影响
12.
A Study on the Annealing Process and Mechanical Properties of Phase Transformation Hardened 980MPa Cold-rolled Steel Sheets
相变强化980MPa冷轧钢板的退火工艺和性能研究
13.
Technical Application and a Comparison of Masteel's GL Strip Annealing Furnaces
马钢板带生产线连续退火炉的技术应用与比较
14.
Formation of the coarse grains in annealed low carbon steel sheets by EBSD analysis
低碳钢退火板中粗大晶粒成因的EBSD分析
15.
Effect of Continuous Annealing Temperature of Cold Rolling IF Steel Produced by CSP Process on r Value;
连续退火温度对马钢CSP-冷轧IF钢板塑性应变比r值的影响
16.
Why shall harden steel be annealed ?
淬火钢为什么要退火呢?
17.
Effect of Annealing Process on the Formability of Cold Rolled SPCD Sheet Produced by CSP;
退火工艺对以CSP热轧带钢为冷轧基板的SPCD性能影响
18.
Effects of Bath Annealing Process on Microstructure and Mechanical Properties of Cold-Rolling Steel Sheet SPCC
罩式退火工艺对SPCC冷轧薄钢板组织及性能的影响