说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 双相不锈钢焊接接头
1.
Study on the Structure and Properties on the Joint of 22Cr Duplex Stainless Steel
22Cr双相不锈钢焊接接头组织和综合性能的研究
2.
Effect of Welding Process on the Properties of Joint of 2205 Duplex Stainless Steel;
焊接工艺对2205双相不锈钢焊接接头综合性能的影响
3.
Effect of welding process on microstructure and properties of 2205 duplex stainless steel welded joint
焊接工艺对2205双相不锈钢焊接接头组织与性能的影响
4.
Study on Stress Corrosion Resistance of 00Cr22Ni5Mo3N Duplex Stainless Steel Welding Joint in Kela2 Gas Field
克拉2气田00Cr22Ni5Mo3N双相不锈钢焊接接头应力腐蚀研究
5.
SAFUREX Double-phase Stainless Steel Bonding Technique
SAFUREX双相不锈钢焊接技术
6.
Welding Technology of Duplex Stainless Steel Air-cooler's Shoe Automatic Argon Arc Welding
双相不锈钢空冷器管头自动氩弧焊焊接工艺
7.
Microstructure and Properties of the Welded Joints of SAF2205/16MnR Duplex Stainless Steel Composite Plate
SAF2205/16MnR双相不锈钢复合板焊接接头的组织与性能
8.
Microstructures and phase composition of QCrO.8/lCr21Ni5Ti joint by EBW with focus on sdteei side
铬青铜与双相不锈钢偏钢电子束焊接头组织及相构成
9.
Surfacing on Duplex Stainless Steel Tube-plate of Heat Exchanger and Welding on Tube-port of Heat Exchanging Tube
换热器管板双相不锈钢堆焊及管板与换热管管头焊接
10.
Welding of Austenite-Ferrite Diphasic Rustless Steel
奥氏体-铁素体型双相不锈钢的焊接
11.
Research on the Welding Technology of 2205 Duplex Stainless Steel
2205双相不锈钢的焊接工艺研究
12.
Investigation of Welding Procedure on Duplex Stainless Steel 2205
SAF2205双相不锈钢焊接工艺研究
13.
Research on Welding Process of Duplex Stainless Steel Tube to Tubesheet Made of 316L
双相不锈钢换热管与316L管板焊接工艺
14.
Review of Dissimilar Metal Welding Between Duplex Stainless Steel and Carbon Steel
双相不锈钢与碳钢异种金属焊接研究综述
15.
Welding Procedure Research on 2205 Duplex Stainless Steel Bimetal Pipe
2205双相不锈钢双金属复合管焊接工艺研究
16.
Welding Shrinkage Deformation and Residual Stress of Duplex Stainless Steel 2205
2205双相不锈钢焊接收缩变形与残余应力研究
17.
Welding Process of Duplex Stainless Steel Tube-sheet with Manual TIG Filler Wire
双相不锈钢管板手工TIG填丝焊接工艺的研究
18.
Welding and Properties of Cr15Mn9Ni1N Austenitic Stainless Steel Welded Joints
Cr15Mn9Ni1N奥氏体不锈钢的焊接及接头性能